Tapit EX Manual ver 4.1.6 - Trisys.com

If you want to start over click on the Clear button.
When finished click on OK to accept the selection and go back to the filter
screen. To cancel the selection and go back to the filter screen click on the
Cancel button.
At the filter screen note a “+” sign next to the Phone label and a dotted line
between the phone number fields. This indicates the range of phone numbers
that has been selected.
19. DNIS Number
To include all DNIS numbers in the report leave both fields empty.
Otherwise, enter a range of DNIS numbers or click on the square button to the
right of the DNIS Number label.
Enter DNIS number you want
to add to the right-side list.
Right-side list contains
selected DNIS numbers.
Check one of the option buttons, Include or Exclude, located on the top of the
selection screen.
Include – the report is run only for the selected DNIS numbers.
Exclude – the selected DNIS numbers are excluded from the report.
To add a DNIS number
Enter the DNIS number in a text box on the left side of the screen.
Transfer the entry to the right-side list by clicking on the right arrow.
To remove a DNIS number
Click on the item in the right-side list to highlight it.
Remove it from the list by clicking on the left arrow.
If you want to start over click on the Clear button.
When finished click on OK to accept the selection and go back to the filter
screen. To cancel the selection and go back to the filter screen click on the
Cancel button.
At the filter screen note a “+” sign next to the DNIS number label and a dotted
Tapit Reports • 41