42ZV650U 47ZV650U 55ZV650U Integrated High Definition LCD ...

Selecting the Power-On Mode
You can select either Power-Saving or Fast mode.
•Power-Saving mode keeps power consumption in
standby mode to below 1W. As a result, it takes a
bit longer for the TV to turn on.
•Fast mode increases power consumption in
standby mode. As a result, the TV will turn on
more quickly.
1 From the SETUP menu, highlight Power-On
Mode.
2 Press C or c to select either Power-Saving or
Fast, then press O.
Select Power-Saving for optimal energy
efficiency.
Using Blue Screen
With the Blue Screen feature, the screen will turn
blue and the sound will be muted on analog
channels and external input modes when no signal is
received.
1 From the PREFERENCES menu, highlight Blue
Screen.
2 Press C or c to select On, and press O.
Setting the screen transparency
You can set the transparency of the on-screen
display system.
1 From the PREFERENCES menu, highlight
Transparency.
2 Press C or c to select Low, Middle, High or Off,
and press O.
40
Chapter 5: Setting up your TV
Viewing the system status
1 From the SETUP menu, highlight System
Information.
2 Press T to display the system information.
System Information
Software Version
ZV650U
1.1.32.0
Feb 25 2009 - 01:06:35
FW: 17
Reset Factory Defaults
You can reset all settings and channels to their
factory default values.
1 From the SETUP menu, highlight Reset TV and
press T.
2 Enter your PIN code (if PIN code has been set).
3 Press C or c to select Yes and press T. The TV
will turn off automatically.
Reset TV
All previous settings will be deleted. Continue?
No
To cancel the reset:
Press C or c to select No and press T.