Workshop cabinets and benches - EN / Hahn+Kolb

Tool trolleys
Tool and workshop trolleys
Workshop equipment
Continued next page
Continued next page
Tool trolleys
with 5 full extension drawers
Execution:
•sturdy sheet steel frame with ABS plastic work plate with integrated tray compartments
•rubberised edge protection profile on the vehicle edges protect the carriage against damage
•individual fastening possibilities through square breadboard on the side walls, e.g. with hooks for tools or other add-on parts, (can holder, paper basket etc.)
•drawers with telescopic full extension 100 %, carrying capacity 25 kg per drawer, total carrying capacity 300 kg
•individual locking of the drawers, integrated into the drawer orifice
•reciprocal pull-out blocking, only one drawer can be opened, thus the carriage is tilt-proof
•central locking, lockable by means of cylinder incl. 2 bending keys
•ergonomic driving and steering handle made of aluminium
•2 large wheels in ball bearings Ø 140 mm, 2 steering wheels Ø 100 mm, thereof one with parking brake
Colour: corpus RAL 7035, light grey and drawers RAL 5010 gentian blue, powder-coated
Accessories:
1
•compartment, can holder, paper basket, partition sheets for drawers see Ident. No. 810-818
•tool hook for rectangular hole on the side walls, see No. 50638 300-650 page 939
3
Tool trolley with
5 drawers
2
Height x Width x Depth mm 925 x 645 x 425
Drawers - internal dimensions width x depth mm 495 x 345
Drawer orifice height mm 2 x 65 / 2 x 140 / 1 x 215
Overall load capacity kg 300
50278 Tool trolleys Ident. No. 800
Unit price E O. R.
50278 Storage compartment 1 Ident. No. 810
Unit price E O. R.
50278 Can holder 2 Ident. No. 812
Unit price E O. R.
50278 Paper bin 3 Ident. No. 814
Unit price E O. R.
50278 Partition sheet metal (2 pieces) for drawers-panel height 65 mm Ident. No. 816
Set price E O. R.
50278 Partition sheet metal (2 pieces) for drawers-panel height 140 mm Ident. No. 818
Set price E O. R.
Prod. Gr. 501
Ident. No. 800 with accessory
Rectangular hole grid in the side walls
for holding accessories
Tool trolleys HAZET Assistant
with rigid columns or tilting poles
Execution: lowering, comprising table top, 2 intermediate boxes, under base container and 4 ball-bearing mounted rollers, of which 2 steerable and lockable.
Colour: blue, powder-coated.
Model 160 ST especially handy, lockable. For varied use as a tool cart during work and as a tool case for carrying. Intermediate boxes with 2divider panels
each. The columns can be laid flat using a patented special hinge and then used as a carrying handle. Top panel and intermediate boxes can be pulled up using
2 finger holes in the top panel.
Model 162 C and 166 C comfortable operation for raising and lowering of the cover and intermediate shelves in two stages. Base container steel sheet, middle
trays plastic, table-top plastic with integrated beech panel. Middle container suitable for holding HAZET tool modules, incl. 2 partition sheets each, can be individually
partitioned. Can be lowered, working height approx. 1000 mm. Locking with padlock. Delivery includes large lockable steering wheels with Ø 125 mm,
fixed wheels with Ø 150 mm, with dust and thread guards, all round rubber profiles.
Model 162 C with rigid columns
Model 166 C with tilting poles which – when folded down to the lowest space-saving height of the cart top – also serve as carrying handles.
Model 160 ST Model 162 C Model 166 C
Model 160 ST 162 C 166 C
Height x Width x Depth mm 950 x 590 x 345 1099 x 725 x 398 1102 x 725 x 398
Height without columns or lowered mm 435 639 647
Weight kg 16,5 25,6 27,6
50273 without tool and accessories Ident. No. 005 015 025
Unit price E O. R. O. R. O. R.
50274 1 set wheels (4 pieces) Ident. No. 085 087
Unit price E O. R. O. R.
h Special tool assortments for tool trolley see No. 50276page 1030. Prod. Gr. 506
1024 2011/12