Workshop cabinets and benches - EN / Hahn+Kolb

Workplace equipment
Workbenches
Continued next page
Heavy duty workbenches series VS – drawers with full extension 100%
Model 223 VS – drawers with full extension 100%
left, centre and right side equipped with 2 drawers each
1 x front height 180 mm
1 x front height 360 mm
180 mm
180 mm
180 mm
360 mm
360 mm
360 mm
Execution Workbench top panel Solid beech (BMP) Solid beech (BMP)
Colour of coating RAL 7035 / 5010 Other colours
Working height Plate L x D x S Drawers internal dimensions Carrying capacity
W x D
per drawer
50202 50202
mm mm mm kg Ident. No. U. pr. E Ident. No. U. pr. E
900 2250 x 800 x 100 500 x 540 100 054 (O. R.) 056 (O. R.)
Figure = version solid beech (BMP) Prod. Gr. 502
Continued next page
Combination workbenches series V – drawers with 100 % full extension 100 %
with different types of plates, 50 mm strong
Execution:
•robust, welded sheet steel frame, under-counter cabinet with drawers, support frame made of square-section steel tubing 45 x 45 x 2 mm
•Working height of 850 mm or 900 mm, workbench top panel made of solid beech (BMP), table top with universal coating (UBP) or table top with zinc sheet
metal coating (ZBP), length depending on model 1500 or 2000 mm depth x thickness 700 x 50 mm, load capacity 800 kg with evenly distributed load
•with the modular system, the workbenches can also be equipped separately with drawers and doors. A grid system of 30 mm enables the installation of drawers
with front height 60-360 mm and doors with front height 360 and 540 mm
Note: on request all workbenches are available also with single extension drawer 86 % and load capacity 100 kg. Price on request.
Optionally available in 3 panel versions:
Workshop equipment
Solid beech (BMP) Panel with universal coating (UBP) Panel with zinc sheet metal coating (ZBP) All drawers with full extension 100% – for
easy and comfortable access.
Massive, can be locked, glued in bars, special Wooden base late with blue-blue, antistatic Wooden base plate with 1.5 mm thick, galvanised
toothing and gluing, therefore extremely
robust and nearly unlimited service life.
non-abrasive coating, with circumferential
2 mm ABS-edge. Resistant short-term steel sheet coating, all around with
flanged edges and fastened on the lower
against weak acids and lyes and heat effect side. The edges are welded and ground. Ideal
up to approx. 250 °C. Long-term resistance
against greases and oils.
for working with oil. Hot galvanised, thus
long-lasting corrosion resistance.
Series configuration:
Drawers with full
extension 100 %
Carrying capacity
100 kg per
drawer
Individual drawer
locking: it is possible
to open one
drawer only
Drawers with perforated
floors and
slotted walls for
individual partition
Drawers with grip
strips, labels and
cellone strips
Door opening
angle 180°
Base made of
square-section
steel tubing 45 x
45 x 2 mm
Accessories:
•suitable drawer partitioning sets, dividers and partitions see No. 50228 page 974
•AQURADO textured mat for drawers, for fitting with Universal box see No. 50540 660 page 1068
•Anti-roll off edging 90 mm high, 14 mm thick made in beech, see No. 50233 405-410 page 987
•Soft soldering and brazing fittings, transparent for protection of the work plate see No. 50233 905-910 page 988
On request:
•electronic central lock
Standard paint: corpus RAL 7035, light grey with fronts RAL 5010, gentian blue, powder-coated
Special colour: following colours available without additional charge:
Level compensation
2keys
Cylinder lock incl.
on one foot up to
max. 20 mm
RAL 1015 RAL 2004 RAL 3002 RAL 3020 RAL 5010 RAL 5012 RAL 5014 RAL 5015 RAL 6011 RAL 7035 RAL 9010
light ivory pure orange crimson red traffic signal red gentian blue light blue pigeon blue sky blue reseda green light grey pure white
We reserve the right to make changes in the printing colours, depending on the original colours according to RAL.
2011/12
971