Workshop cabinets and benches - EN / Hahn+Kolb

Workplace equipment
Base cabinets
Continued next page
Assortment of inserts for drawers
for HK built-in sub-base cabinet system and drawer blocks
Range of inserts for individual drawers to create tailor-made cabinet configurations.
1 Trough plates 2 Containers 3 Spare boxes 4 Compartment divisions
5 Anti-slip mat 6 Rubber ribbed mat 7AQURADO set with
textured mats and
10 boxes (without tools)
8AQURADO set with
textured mats and
7 boxes (without tools)
set No. 1 2 3 4 5 6 7 8
For box height mm From 40 From 40 From 40 From 70 From 40 From 70 From 100 From 40 From 40 From 40 From 40
50485 Ident. No. 060 090 095 100 110 120 130 200 210 250 260
Unit price E O. R. (O. R.) O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.
h AQURADO textured mat see No. 50540 680 page 1068.
Two-coloured hard foam inserts suitable for our tool program, individually designed, 18 or 31 mm in height available on request.
Ident. No. 060-210 = Prod. Gr. 503
Ident. No. 250-260 = Prod. Gr. 581
Workshop equipment
Continued next page
Subbase cabinet with vice and height adjusting unit (folding)
made from sheet steel
Execution: with incorporated a parallel vice, jaw width 100 mm, fold-out HEUER height adjusting unit and door.
•vice after loosening 2 knurled screws foldable under the workbench.
•height adjusting unit allows continuous height adjustment of the vice through gas pressure springs and can be folded up weightlessly
•stop securely using clamp lever and fix in any position
Paint: corpus RAL 7035, light grey, doors RAL 5010, gentian blue, powder-coated
Other colours available at no extra cost, see page 981.
Dimensions H x W x D mm 800 x 320 x 680
50212 RAL 7035 / 5010 Ident. No. 650
Unit price E (O. R.)
Prod. Gr. 501
2011/12
985