Workshop cabinets and benches - EN / Hahn+Kolb

Cabinets and cupboards
Tool cabinets
Continued next page
Tool cabinets
Selection overview
From this overview, you can see all of the available designs for our tool cabinet systems at a glance. Our system designations for the tool cabinets are constructed
as follows:
System S (narrow = 722 mm)
System B (wide = 1022 mm)
1568 mm
1336 mm
1036 mm
800 mm
800 mm
800
722 mm
550 mm
700 mm
1022 mm
Product video:
drawers with optional Soft-Close-Automatic.
System 550 S 550 B 700 S 700 B 800 S 800 B
Depth mm 550 550 700 700 800 800
Width mm 722 1022 722 1022 722 1022
Height mm 800 / 1036 / 1336 / 1568
Drawers - internal dimensions W x D mm 600 x 450 900 x 450 600 x 600 900 x 600 600 x 700 900 x 700
Storage surface per drawer mm 0,27 0,41 0,36 0,54 0,42 0,63
Drawer extension Part / Fully extended Part / Fully extended Part / Fully extended Part / Fully extended Part / Fully extended Part / Fully extended
Carrying capacity per drawer with uniformly kg 100 / 200 100 / 200 100 / 200 100 / 200 100 / 200 100 / 200
distributed load
Art. No. 50295 50298 50300 50302 50310 50315
Catalogue from page 1048 from page 1050 from page 1052 from page 1055 from page 1057 from page 1060
550 mm
700 mm
Workshop equipment
Housing:
U robust, welded sheet steel frame, equipped with plasticcoated
cover panel (8 mm)
U protected from overturning with drawer lock
Drawers:
Drawers:
U ideal guide properties through Delrin rollers and specially
formed profile with positive guide on both sides and lateral
guide rollers
U individual partitioning possible through slotted walls and
perforated bottoms of the drawers.
U due to the drawer extension protection it is possible to
open one drawer only
U therefore the cabinet is tilt proof, since only one drawer
can be drawn out
U On request: Drawer damper with soft pulling, dampens
drawers and provides for slow, silent closing
Drawers:
U aluminium handle strips with paper and cellone strips and
lateral cover caps
U carrying capacity of the drawers is displayed through the
coloured identification of the cover caps
U Drawers flush with cabinet housing, no protruding handle
strips
Standard paint: corpus RAL 7035, light grey with fronts RAL 5010, gentian blue, powder-coated.
Special colour: following colours available without additional charge:
For the individual set up of the cabinets, individual insert DOM® lock system:
materials are also available for your selection in addition to U central locking with safety turning cylinder lock, laterally
our complete sets.
arranged on the right side
U thanks to the plug-in system, the cylinder can be conveniently
replaced without dismantling the drawer
U electronic central locking on request
RAL 1015 RAL 2004 RAL 3002 RAL 3020 RAL 5010 RAL 5012 RAL 5014 RAL 5015 RAL 6011 RAL 7035 RAL 9010
light ivory pure orange crimson red traffic signal red gentian blue light blue pigeon blue sky blue reseda green light grey pure white
We reserve the right to make changes in the printing colours, depending on the original colours according to RAL.
2011/12
1047