Workshop cabinets and benches - EN / Hahn+Kolb
Workshop cabinets and benches - EN / Hahn+Kolb
Workshop cabinets and benches - EN / Hahn+Kolb
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Workplace equipment<br />
Work<strong>benches</strong><br />
Continued next page<br />
3Work<strong>benches</strong> series VX 1500/2000 – XXL drawers with full extension 100%<br />
with different types of plates, 50 mm strong<br />
Execution:<br />
•robust, welded sheet steel frame, support frame made of square-section steel tubing 45x45x2 mm, carrying capacity 1500 kg for evenly distributed load<br />
•working height of 850 mm or 900 mm, workbench top panel made of solid beech (BMP), table top with universal coating (UBP) or table top with zinc sheet<br />
metal coating (ZBP), length depending on model 1500 or 2000 mm depth x thickness 800 x 50 mm<br />
•with the modular system, the work<strong>benches</strong> can also be equipped separately with drawers <strong>and</strong> doors. A grid system of 30 mm enables the installation of drawers<br />
with front height 60-360 mm <strong>and</strong> doors with front height 360 <strong>and</strong> 540 mm<br />
XXL drawers with full extension – ideal for the storage of long <strong>and</strong> big tools.<br />
Example with diverse measuring instruments in an individual hard foam insert<br />
Optionally available in 3 panel versions:<br />
Ideal to store tool cases <strong>and</strong>/or bulky parts<br />
Product video:<br />
use your mobile phone to scan the QR code.<br />
Solid beech (BMP) Panel with universal coating (UBP) Panel with zinc sheet metal coating (ZBP)<br />
Massive, can be locked, glued in bars, special toothing <strong>and</strong><br />
gluing, therefore extremely robust <strong>and</strong> nearly unlimited<br />
Wooden base late with blue-blue, antistatic non-abrasive<br />
coating, with circumferential 2 mm ABS-edge. Resistant<br />
Wooden base plate with 1.5 mm thick, galvanised steel<br />
sheet coating, all around with flanged edges <strong>and</strong> fastened on<br />
service life.<br />
short-term against weak acids <strong>and</strong> lyes <strong>and</strong> heat effect up to the lower side. The edges are welded <strong>and</strong> ground. Ideal for<br />
approx. 250 °C. Long-term resistance against greases <strong>and</strong> working with oil. Hot galvanised, thus long-lasting corrosion<br />
oils.<br />
resistance.<br />
Series configuration:<br />
Drawers with full<br />
extension 100 %<br />
Carrying capacity<br />
100 kg per drawer<br />
Individual drawer<br />
locking: it is possible<br />
to open one<br />
drawer only<br />
Drawers with perforated<br />
floors <strong>and</strong><br />
slotted walls for<br />
individual partition<br />
Drawers with grip<br />
strips, labels <strong>and</strong><br />
cellone strips<br />
Accessories:<br />
•suitable drawer partitioning sets, dividers <strong>and</strong> partitions see No. 50206 page 980, series VX<br />
•anti-roll off edging 90 mm high, 14 mm thick made in beech, see No. 50233 405-410 page 987<br />
•soft PVC mats, transparent for protection of the work plate see No. 50233 928-930 page 988<br />
On request:<br />
•perforated sheet metal with 10 mm square holes, optionally with energy units for side wall<br />
•electronic central lock<br />
St<strong>and</strong>ard paint: corpus RAL 7035, light grey with fronts RAL 5010, gentian blue, powder-coated<br />
Special colour: following colours available without additional charge:<br />
Base made of<br />
square-section<br />
steel tubing<br />
45 x 45 x 2 mm<br />
Level compensation<br />
on one foot up to<br />
max. 20 mm<br />
Cylinder lock incl.<br />
2keys<br />
<strong>Workshop</strong> equipment<br />
RAL 1015 RAL 2004 RAL 3002 RAL 3020 RAL 5010 RAL 5012 RAL 5014 RAL 5015 RAL 6011 RAL 7035 RAL 9010<br />
light ivory pure orange crimson red traffic signal red gentian blue light blue pigeon blue sky blue reseda green light grey pure white<br />
We reserve the right to make changes in the printing colours, depending on the original colours according to RAL.<br />
2011/12<br />
977