Workshop cabinets and benches - EN / Hahn+Kolb
Workshop cabinets and benches - EN / Hahn+Kolb
Workshop cabinets and benches - EN / Hahn+Kolb
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Cabinets <strong>and</strong> cupboards<br />
Grinding wheel <strong>cabinets</strong> <strong>and</strong> storage systems<br />
Continued next page<br />
TUREX grinding wheel store<br />
for a safe <strong>and</strong> rational storage of your grinding wheels<br />
Do you have problems with the storage of your grinding wheels? We can offer the solution!<br />
There are 5 different construction types <strong>and</strong> construction sizes covering the grinding wheel range from Ø<br />
300 mm to Ø 1100 mm <strong>and</strong> grinding wheel weights up to 350 kg. According to the requirements in open<br />
design or in cabinet with hinged doors, with swivelling arms or for tilting.<br />
Damages during storage <strong>and</strong> transport are therefore problems of the past.<br />
The wheels are carried on support arms which swing out of the frame through an angle of about 135° <strong>and</strong><br />
can be tilted through 90°. Needle bearings have the effect of making them very free-moving. Each arm has<br />
a st<strong>and</strong>ard mounting spigot made of aluminium. Mounting spigots matched to the corresponding flange<br />
holes available at extra cost. Tilting the grinding wheel up or down can be done without great effort since<br />
the tilt axis lies exactly on the centre of gravity of each wheel. In order to screw the mounting onto the lifting<br />
gear, the grinding wheel can be turned about its own axis without difficulty. A lever on each arm secures<br />
the grinding wheel when tilted down or up. The number of arms is dependent on the wheel thickness. The<br />
basic version of the grinding wheel store has 6 arms with mounting spigots. Other configurations available<br />
on request. Floor fixing required.<br />
For calculating the dimensions of the grinding wheel store according to your requirements the<br />
dimensions of the grinding wheels are needed as shown in the drawing below.<br />
Open type,<br />
with fold-down pivoting arm<br />
<strong>Workshop</strong> equipment<br />
Composition of grinding wheels to be stored in grinding wheel store<br />
Number<br />
Grinding wheels Support flange Cover max.<br />
of grinding Flange Dimensions,<br />
Dimensions mm<br />
Ømm Weight<br />
wheels<br />
mm<br />
in kg<br />
with without D b B d1 d 2 l Spigot 1:? H t L<br />
- - - - - - - - - - - - - - -<br />
h Further information, advice <strong>and</strong> quotations available on request.<br />
t Technical Hotline +49(0)711 9813-360<br />
Model in hinged door cabinet<br />
with swing-out prevention<br />
1072 2011/12