Workshop cabinets and benches - EN / Hahn+Kolb
Workshop cabinets and benches - EN / Hahn+Kolb
Workshop cabinets and benches - EN / Hahn+Kolb
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Workplace equipment<br />
Work<strong>benches</strong><br />
Continued next page<br />
Work<strong>benches</strong> series V – drawers with full extension 100%<br />
with different types of plates, 50 mm strong<br />
Execution:<br />
•robust, welded sheet steel frame, support frame made of square-section steel tubing 45x45x2 mm,<br />
•working height of 850 mm or 900 mm, workbench top panel made of solid beech (BMP), table top with universal coating (UBP) or table top with zinc sheet<br />
metal coating (ZBP), length depending on model 1500, 2000 or 2800 mm depth x thickness 700 x 50 mm, load capacity 1500 kg with evenly distributed load<br />
•with the modular system, the work<strong>benches</strong> can also be equipped separately with drawers <strong>and</strong> doors. A grid system of 30 mm enables the installation of drawers<br />
with front height 60-360 mm <strong>and</strong> doors with front height 360 <strong>and</strong> 540 mm<br />
•also available models in mirror-image version or with reset shelves for sitting variant<br />
Note: on request all work<strong>benches</strong> are available also with single extension drawer 86 % <strong>and</strong> load capacity 100 kg. Price on request.<br />
Optionally with 3 different types of panel:<br />
Solid beech (BMP) Panel with universal coating (UBP) Panel with zinc sheet metal coating (ZBP) All drawers with full extension 100% – for<br />
easy <strong>and</strong> comfortable access.<br />
Massive, can be locked, glued in bars, special Wooden base late with blue-blue, antistatic Wooden base plate with 1.5 mm thick, galvanised<br />
toothing <strong>and</strong> gluing, therefore extremely<br />
robust <strong>and</strong> nearly unlimited service life.<br />
non-abrasive coating, with circumferential<br />
2 mm ABS-edge. Resistant short-term steel sheet coating, all around with<br />
flanged edges <strong>and</strong> fastened on the lower<br />
against weak acids <strong>and</strong> lyes <strong>and</strong> heat effect side. The edges are welded <strong>and</strong> ground. Ideal<br />
up to approx. 250 °C. Long-term resistance<br />
against greases <strong>and</strong> oils.<br />
for working with oil. Hot galvanised, thus<br />
long-lasting corrosion resistance.<br />
Series configuration:<br />
Drawers with full<br />
extension 100 %<br />
Carrying capacity<br />
100 kg per<br />
drawer<br />
Individual drawer<br />
locking: it is possible<br />
to open one<br />
drawer only<br />
Drawers with perforated<br />
floors <strong>and</strong><br />
slotted walls for<br />
individual partition<br />
Drawers with grip<br />
strips, labels <strong>and</strong><br />
cellone strips<br />
Door opening<br />
angle 180°<br />
Accessories:<br />
•suitable drawer partitioning sets, dividers <strong>and</strong> partitions see No. 50228 page 974<br />
•AQURADO textured mat for drawers, for fitting with Universal box see No. 50540 660 page 1068<br />
•anti-roll off edging 90 mm high, 14 mm thick made in beech, see No. 50233 405-410 page 987<br />
•soft PVC mats, transparent for protection of the work plate see No. 50223 905-910 page 988<br />
Additional extra features possible, see from page 975:<br />
Base made of<br />
square-section<br />
steel tubing 45 x<br />
45 x 2 mm<br />
1x level compensation<br />
for work-<br />
2keys<br />
Cylinder lock incl.<br />
<strong>benches</strong> 1500/<br />
2000 mm, 6x for<br />
work<strong>benches</strong><br />
2800 mm<br />
<strong>Workshop</strong> equipment<br />
Shelf, solid version No. 900 or with full extension<br />
100% No. 902<br />
Document panel for inner side of the door<br />
No. 904<br />
Workbench panel for the inner side of the<br />
door No. 906<br />
Perforated sheet metal for side wall Ident.<br />
No. 908<br />
Perforated sheet metal with energy units –<br />
price on request<br />
electronic central lock – Price on request<br />
St<strong>and</strong>ard paint: corpus RAL 7035, light grey with fronts RAL 5010, gentian blue, powder-coated<br />
Special colour: following colours available without additional charge:<br />
Product video:<br />
use your mobile phone to scan the QR code.<br />
RAL 1015 RAL 2004 RAL 3002 RAL 3020 RAL 5010 RAL 5012 RAL 5014 RAL 5015 RAL 6011 RAL 7035 RAL 9010<br />
light ivory pure orange crimson red traffic signal red gentian blue light blue pigeon blue sky blue reseda green light grey pure white<br />
We reserve the right to make changes in the printing colours, depending on the original colours according to RAL.<br />
h Other workbench lengths <strong>and</strong> drawer/door compositions available on request.<br />
Please ask for our brochure describing our complete line of work<strong>benches</strong>.<br />
t Technical Hotline +49(0)711 9813-360<br />
i Selection overview work<strong>benches</strong> page 953.<br />
2011/12<br />
961