Workshop cabinets and benches - EN / Hahn+Kolb

Tool holder system WTS
Hinged door and roller shutter cabinets
Continued next page
Perforated wall
for module hinged doors or roller shutter cabinet housing
Application:
•suited for suspending in module hinged doors or roller shutter cabinet housing
•rectangular hole grid for holding tool hooks and accessories
Execution:
•made of steel sheet metal, height x width 480 x 945 mm, 10 x 10 mm perforated in squares
Paint: RAL 7035, light grey, powder-coated.
Accessory: Hook for rectangular hole, to take up tools,
see No. 50638 300-650 page 939.
Dimensions H x W mm 480 x 945
50658 Ident. No. 350
Unit price E (O. R.)
Prod. Gr. 507
Example of application
Continued next page
Drawers with rails
for module hinged doors or roller shutter cabinet housing
Execution:
•made of steel sheet metal with a reinforced, perforated bottom (25 mm hole grid)
•clear width x depth 900 x 450 mm, storage area = 0.41 m²
•full extension 100 %, load-bearing capacity 100 kg with evenly distributed load
•drawers running on Delrin rollers in rails which are suspended into the housing with plug-in locks
•inner drawer sides slotted all around, for attaching and fixing individual items
•drawer equipped with handle strip, paper and cellone strips and lateral cover caps
Accessories:
•wide range of insert material and recommended insert sets for the drawer inner fittings see
No. 50483 040-270 page 1051.
•WTS support profiles for drawer insert see No. 50654 110-158 page 1052.
Front height mm 60 90 120 150 180 210 240 270 300 330 360
Box height mm 40 70 100 130 130 130 130 130 130 130 130
Bearing height mm 40 70 100 130 130 130 130 130 130 130 130
50298 Ident. No. 300 305 310 315 320 325 330 335 340 345 350
Unit price E (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.)
h When ordering please quote the complete Part. No. and the RAL colour. Prod. Gr. 501
Workshop equipment
Continued next page
Shelves
for module hinged doors or roller shutter cabinet housing
Execution:
Ident. No. 380 made of steel sheet metal, full extension 100 %, with rails, equipped with aluminium grip
strip, paper, cellone strips and lateral cover caps, carrying capacity 100 kg for evenly distributed
load
Ident. No. 390 made of steel sheet, sturdy design, height-adjustable, with support rails,
carrying capacity 100 kg for evenly distributed load.
Ident. No. 395 pull-out type, made of beech Multiplex, 20 mm thick, lacquered, with rails,
carrying capacity 100 kg for evenly distributed load.
Application example with
ident. No. 395
Ident. No. 380 Ident. No. 390
Version full extension 100 % fixed, height adjustable pull-out type
Clear width x depth mm 900 x 450 935 x 450 900 x 450
Storage surface m² 0,41 0,42 0,41
Carrying capacity kg 100 100 100
50298 Ident. No. 380 390 395
Unit price E (O. R.) (O. R.) (O. R.)
h For Ident. No. 380-390: When ordering please quote the desired RAL colour. Prod. Gr. 501
2011/12
1081