Workshop cabinets and benches - EN / Hahn+Kolb

Cabinets and cupboards
Insert material for drawers
Continued next page
Trough plates and insert walls
Ident. No. 020-140 Trough plates made of ABS
Ident. No. 200 Insert walls made of ABS
Ident. No. 300 and 400 Insert walls made of polypropylene
For storage of items sensitive on their outside, up to a max. Ø 70 mm. The troughs can be subdivided in
increments of 14 mm with trough insert walls. Trough insert walls with label holder and paper strips for
subdividing individual troughs.
Height mm 29
Rated width x Depth mm 150 x 150 150 x 150 150 x 150 150 x 100 150 x 100 150 x 100
No. of troughs 2 3 4 2 3 4
For parts up toØ mm 70 44 32 70 44 32
50509 Trough panels Ident. No. 020 030 040 120 130 140
Unit price E O. R. O. R. O. R. O. R. O. R. O. R.
50509 Trough insert walls Ident. No. 200 300 400 200 300 400
Unit price E O. R. O. R. O. R. O. R. O. R. O. R.
Prod. Gr. 503
Continued next page
Plug-in holders
made of plastic
For insertion in the perforations in the drawer base. Suitable as soft underlay for delicate items or as
restraining wall for stored parts.
Length mm 32
50511 Plug-in holders Ident. No. 010
Unit price E O. R.
Prod. Gr. 503
Continued next page
Drawer rails
made of sheet steel
With slotted strips on both sides, average separation of slots 25 : 3 = 8.33 mm. The compartment rails are
screwed to the drawer floors.
Scope of delivery: without compartment rail screws e and hexagonal nuts.
Workshop equipment
Height mm 40 70
Nominal length mm 225 300 450 600 700 900 225 300 450 600 700 900
50513 Ident. No. 210 220 230 240 250 260 310 320 330 340 350 360
Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.
Height mm 100 130
Nominal length mm 225 300 450 600 700 900 225 300 450 600 700 900
50513 Ident. No. 410 420 430 440 450 460 500 510 520 530 540 550
Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.
h Compartment rail screws see No. 50520 010 page 1066, hexagonal nuts see No. 50505 010 page 1064. Prod. Gr. 503
Continued next page
Compartment dividers
Ident. No. 210-230 double-walled, made of shatterproof plastic
Ident. No. 300-530 made of aluminium
for insertion into compartment rails
Height mm 40 70
Nominal length mm 100 150 225 135 275 100 135 150 225 275 425 450
50514 Ident. No. 210 220 230 300 305 310 311 320 330 331 332 340
Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.
Height mm 70 100 130
Nominal length mm 600 100 135 150 225 275 425 450 600 100 150 225
50514 Ident. No. 350 410 411 420 430 431 432 440 450 510 520 530
Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.
Prod. Gr. 503
2011/12
1065