Workshop cabinets and benches - EN / Hahn+Kolb

More documents

Recommendations

Info

Workplace equipment Workbenches Continued next page 3Workbenches series VX 1500/2000 – XXL drawers with full extension 100% with different types of plates, 50 mm strong Execution: •robust, welded sheet steel frame, support frame made of square-section steel tubing 45x45x2 mm, carrying capacity 1500 kg for evenly distributed load •working height of 850 mm or 900 mm, workbench top panel made of solid beech (BMP), table top with universal coating (UBP) or table top with zinc sheet metal coating (ZBP), length depending on model 1500 or 2000 mm depth x thickness 800 x 50 mm •with the modular system, the workbenches can also be equipped separately with drawers and doors. A grid system of 30 mm enables the installation of drawers with front height 60-360 mm and doors with front height 360 and 540 mm XXL drawers with full extension – ideal for the storage of long and big tools. Example with diverse measuring instruments in an individual hard foam insert Optionally available in 3 panel versions: Ideal to store tool cases and/or bulky parts Product video: use your mobile phone to scan the QR code. Solid beech (BMP) Panel with universal coating (UBP) Panel with zinc sheet metal coating (ZBP) Massive, can be locked, glued in bars, special toothing and gluing, therefore extremely robust and nearly unlimited Wooden base late with blue-blue, antistatic non-abrasive coating, with circumferential 2 mm ABS-edge. Resistant Wooden base plate with 1.5 mm thick, galvanised steel sheet coating, all around with flanged edges and fastened on service life. short-term against weak acids and lyes and heat effect up to the lower side. The edges are welded and ground. Ideal for approx. 250 °C. Long-term resistance against greases and working with oil. Hot galvanised, thus long-lasting corrosion oils. resistance. Series configuration: Drawers with full extension 100 % Carrying capacity 100 kg per drawer Individual drawer locking: it is possible to open one drawer only Drawers with perforated floors and slotted walls for individual partition Drawers with grip strips, labels and cellone strips Accessories: •suitable drawer partitioning sets, dividers and partitions see No. 50206 page 980, series VX •anti-roll off edging 90 mm high, 14 mm thick made in beech, see No. 50233 405-410 page 987 •soft PVC mats, transparent for protection of the work plate see No. 50233 928-930 page 988 On request: •perforated sheet metal with 10 mm square holes, optionally with energy units for side wall •electronic central lock Standard paint: corpus RAL 7035, light grey with fronts RAL 5010, gentian blue, powder-coated Special colour: following colours available without additional charge: Base made of square-section steel tubing 45 x 45 x 2 mm Level compensation on one foot up to max. 20 mm Cylinder lock incl. 2keys Workshop equipment RAL 1015 RAL 2004 RAL 3002 RAL 3020 RAL 5010 RAL 5012 RAL 5014 RAL 5015 RAL 6011 RAL 7035 RAL 9010 light ivory pure orange crimson red traffic signal red gentian blue light blue pigeon blue sky blue reseda green light grey pure white We reserve the right to make changes in the printing colours, depending on the original colours according to RAL. 2011/12 977
Workplace equipment Workbenches Continued next page Workbenches series VX – XXL drawers with full extension 100% Model 16 VX XXL-drawers with full extension 100% equipped with 3 drawers 2 x front height 90 mm 1 x front height 360 mm 90 mm 90 mm 360 mm Execution Workbench top panel Solid beech (BMP) Solid beech (BMP) Universal panel (UBP) Universal panel (UBP) Zinc sheet metal coating panel (ZBP) Zinc sheet metal coating panel (ZBP) Colour of coating RAL 7035 / 5010 Other colours RAL 7035 / 5010 Other colours RAL 7035 / 5010 Other colours Working Plate height L x D x S 50206 50206 50206 50206 50206 50206 Drawers - internal dimensions W x D Carrying capacity per drawer mm mm mm kg Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E 850 240 (O. R.) 241 (O. R.) 244 (O. R.) 245 (O. R.) 248 (O. R.) 249 (O. R.) 1500 x 800 1200 x 600 100 900 x50 242 (O. R.) 243 (O. R.) 246 (O. R.) 247 (O. R.) 250 (O. R.) 251 (O. R.) Figure = version solid beech (BMP) Prod. Gr. 502 Continued next page Workbenches series VX – XXL drawers with full extension 100% Model 31 VX XXL-drawers with full extension 100% Workshop equipment equipped with 4 drawers 1 x front height 90 mm 1 x front height 120 mm 1 x front height 150 mm 1 x front height 180 mm Execution Workbench top panel Solid beech (BMP) Solid beech (BMP) Universal panel (UBP) Universal panel (UBP) Zinc sheet metal coating panel (ZBP) Zinc sheet metal coating panel (ZBP) Colour of coating RAL 7035 / 5010 Other colours RAL 7035 / 5010 Other colours RAL 7035 / 5010 Other colours Working Plate height L x D x S 50206 50206 50206 50206 50206 50206 Drawers - internal dimensions W x D Carrying capacity per drawer mm mm mm kg Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E 850 252 (O. R.) 253 (O. R.) 256 (O. R.) 257 (O. R.) 260 (O. R.) 261 (O. R.) 1500 x 800 1200 x 600 100 900 x50 254 (O. R.) 255 (O. R.) 258 (O. R.) 259 (O. R.) 262 (O. R.) 263 (O. R.) 90 mm 120 mm 150 mm 180 mm Figure = version solid beech (BMP) Prod. Gr. 502 Continued next page Workbenches series VX – XXL drawers with full extension 100% Model 29 VX XXL-drawers with full extension 100% equipped with 5 drawers 2 x front height 60 mm 2 x front height 120 mm 1 x front height 180 mm 60 mm 60 mm 120 mm 120 mm 180 mm Execution Workbench top panel Solid beech (BMP) Solid beech (BMP) Universal panel (UBP) Universal panel (UBP) Zinc sheet metal coating panel (ZBP) Zinc sheet metal coating panel (ZBP) Colour of coating RAL 7035 / 5010 Other colours RAL 7035 / 5010 Other colours RAL 7035 / 5010 Other colours Working Plate height L x D x S 50206 50206 50206 50206 50206 50206 Drawers - internal dimensions W x D Carrying capacity per drawer mm mm mm kg Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E 850 264 (O. R.) 265 (O. R.) 268 (O. R.) 269 (O. R.) 272 (O. R.) 273 (O. R.) 1500 x 800 1200 x 600 100 900 x50 266 (O. R.) 267 (O. R.) 270 (O. R.) 271 (O. R.) 274 (O. R.) 275 (O. R.) Figure = version solid beech (BMP) Prod. Gr. 502 978 2011/12
Page 1 and 2:
Workshop equipment Chapter overview
Page 3 and 4:
Small parts storage Assortment cont
Page 5 and 6:
Small parts storage Drawer magazine
Page 7 and 8:
Small parts storage Tool bags and c
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16: Small parts storage Padlocks Contin
Page 17 and 18: Small parts storage Easy view stora
Page 19 and 20: Small parts storage Shelving cabine
Page 21 and 22: Small parts storage Wheel trolleys
Page 23 and 24: Small parts storage RasterPlan prog
Page 25 and 26: Small parts storage RasterPlan prog
Page 27 and 28: Small parts storage Perforated and
Page 29 and 30: Small parts storage Perforated and
Page 31 and 32: Shelving systems Tool shelving unit
Page 33 and 34: Shelving systems Boltless shelving
Page 35 and 36: Shelving systems Pallet shelving Co
Page 37 and 38: Environmental protection and waste
Page 43 and 44: Workplace equipment Work tables Con
Page 45 and 46: Workplace equipment Workbenches Con
Page 65: Workplace equipment Workbenches Con
Page 71 and 72: Workplace equipment Base cabinets C
Page 77 and 78: Workplace equipment System workstat
Page 79 and 80: Workplace equipment Assembly and wo
Page 85 and 86: Workplace equipment Work chairs Con
Page 91 and 92: Workplace equipment Workstation mat
Page 93 and 94: Workplace equipment Workstation mat
Page 95 and 96: Workplace equipment Step stools Con
Page 97 and 98: Workplace equipment Ladders Continu
Page 99 and 100: Lifting equipment Hydraulic machine
Page 101 and 102: Lifting equipment Pallet trucks Con
Page 103 and 104: Lifting equipment Scissor lifting t
Page 105 and 106: Transport equipment Platform trolle
Page 107 and 108: Transport equipment Table trolleys
Page 109 and 110: Tool trolleys Tool and workshop tro
Page 111 and 112: Tool trolleys Module hard-foam inse
Page 117 and 118:
Tool trolleys Tool and workshop tro
Page 119 and 120:
Tool trolleys Tool assortments Cont
Page 121 and 122:
Cabinets and cupboards Protective h
Page 123 and 124:
Cabinets and cupboards Clothing cab
Page 125 and 126:
Cabinets and cupboards Hinged door
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Cabinets and cupboards Sliding door
Page 135 and 136:
Cabinets and cupboards Sliding door
Page 137 and 138:
Cabinets and cupboards Tool cabinet
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Cabinets and cupboards Insert mater
Page 155 and 156:
Cabinets and cupboards Insert mater
Page 157 and 158:
Cabinets and cupboards Classificati
Page 159 and 160:
Cabinets and cupboards Classificati
Page 161 and 162:
Cabinets and cupboards Grinding whe
Page 163 and 164:
Tool holder system WTS Module frame
Page 165 and 166:
Tool holder system WTS Transport an
Page 167 and 168:
Tool holder system WTS Storage and
Page 169 and 170:
Tool holder system WTS Hinged door
show all

Workshop cabinets and benches - EN / Hahn+Kolb

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?