B-SA4T Series - Toshiba Tec Italia

Continued from the previous page.
[RESTART] [FEED]
RFID
[RESTART] [FEED]
Z-MODE
[RESTART] [FEED]
RFID read test, RFID module type, Carrier sense (Not available to
B-SA704-RFID-U2-EU-R), RFID tag type, RFID module’s
destination code setting (user-inaccessible setting), (RFID error tag
detection, Maximum number of issue retries, Maximum number of
read retries, Read retry time-out, Maximum number of write retries,
Write retry time-out, RFID adjustment for retry, RFID output power
level, AGC threshold, RFID channel (Not available to B-SA704-
RFID-U2-EU-R), Q value, AGC threshold for data write, AGC
threshold lower limit for retry, Hibiki tag multi-word write, Password
to protect error tag detection, Access password setting, Automatic
unlock function setting
Z-Mode setting, BASIC system mode program setting
(Supported from C1.9A)
•System mode for users (Available menu items are limited.)
[RESTART]
Power OFF
While holding the [FEED] and [RESTART] keys down, turn the power on.
DIAG.
[RESTART]
[FEED]
Printing of maintenance counter values and various parameter
values
Printer self-test operation and printing of results
PARAMETER SETTING
[RESTART]
[FEED]
ADJUST SET
[RESTART]
[FEED]
Feed amount fine adjustment, Cut (strip) position fine adjustment,
Reverse feed amount fine adjustment, X-coordinate fine
adjustment, Print tone fine adjustment (Thermal transfer/Direct
thermal print mode), Ribbon motor drive voltage fine adjustment,
Transmissive sensor manual threshold fine adjustment, Reflective
sensor manual threshold fine adjustment
TEST PRINT
[FEED]
Test print condition parameters, 1-dot slant line print, 3-dot slant
line print, Character print, Bar code print, Non-printing, Line print
for assembly process, Assembly process automatic print
(Transmissive sensor/Reflective sensor)
- 43 -