Metrology Equipment Catalog - Rapp Industrial Sales

E L E C T RO N I C I N D I C ATOExternal R S, D I AMicrometersL G AG E S, P RExternalE C I S I O NMicrometersI N D I C ATO R SE L E C T RO N I C I N D I C ATO R S, D I A L G AG E S, P R E C I S I O N I N D I C ATO R Sin in mm mm µm Amm Bmm g599-1034 86378 1 0.00005 25 0.001 5 78.4 53.4 13019.30110 26756 0.5 0.0005 12.5 0.01 10 65.9 53.4 12019.30111 26757 1 0.0005 25 0.01 10 78.4 53.4 13019.30112 26758 2 0.0005 50 0.01 20 150.5 90.5 21019.30113 26759 4 0.0005 100 0.01 20 250.5 140.5 25019.30101 26753 0.5 0.00005 12.5 0.001 5 65.9 53.4 12019.30100 26760 1 0.00005 25 0.001 5 78.4 53.4 13019.30102 26754 2 0.00005 50 0.001 12 150.5 90.5 21019.30103 26755 4 0.00005 100 0.001 15 250.5 140.5 250DIGICO ® 11With same basic features as set forth on page E-7 plus the following functions:• Possible entry of limiting values for classification through color LEDs: green for “Good”, red for “Scrap”,amber for “Rework”.• Value storage using the functions “Highest value”, “Lowest value”and “Highest value minus lowest value”.• Counting sense reversal.IEC 60529:IP 51See tablesSupplied in asuited carryingcase with:1 lithium battery, typeCR 2032, No. 19.61000IdentificationnumberInspectionreport with adeclaration of conformityin in mm mm µm Amm Bmm g19.30104 27281 0.5 0.00005 12.5 0.001 5 65.9 53.4 12019.30105 27280 1 0.00005 25 0.001 5 78.4 53.4 130DIGICO ® MIN/MAXWith same basic features as DIGICO 11 except that PRESET function is not available.• Mainly used for value classification through the function “Highest value minus lowest value”.in in mm mm µm Amm Bmm g19.30120 28637 0.5 0.00005 12.5 0.001 5 65.9 53.4 120E-6Rapp Industrial Sales888 789-7277