Metrology Equipment Catalog - Rapp Industrial Sales

C O O R D I D N AT E M E A S U R I N G M AC H I N E SC O O R D I N AT E M E A S U R I N G M A C H I N E STESA Micro-Hite 3D RCAdded version to the existing range of TESA small CMMs – Permits exactpositioning on complex workpieces – Includes 3 servomotors controlledseparately over a joystick, each enabling the machine to move in the threecoordinate directions with a positioning down to the micron – Makes manual displacementthrough the fine adjust option also possible – Performs value capture using a singlebutton – Well-suited for use with a CCD camera for optical measurement.Main Features• Motorized displacement in allthree axes X/Y/Z at a selectablespeed of 1 µm/step, 10 mm/sor 20 mm/s.• Manual operation in eachcoordinate axis at the speedof 760 mm/s.• Fine adjustment device.• TESASTAR-i indexable probehead.• TESA Reflex application softwarelearned in a few hoursonly.• Joystick with integratedZMouse.General3EN ISO 10360-1CMMwith movingbridge.Measuring systems alongwith air bearing guiding in thethree axes.Measuringvolume(X/Y/Z):460 x 500 x 420 mm0.001 mm0.00001 inManually operatedor motorizedLight alloymachine base;granite measuringtable.Opto-electronicmeasuringsystems basedon incremental glass scales0.039 µm(CMM)760 mm/s for themanual version or1 µm/step, 10 or20 mm/s for the motorizedone.Control Panel89 x 118 mmdisplay fieldalong withilluminated background7-decade display(digits) plussign for themeasured values.Icon-base User’s guide.RS 232Accuracy3 µmMeasurementuncertainty asper VDI/VDE:U1 = (3 + 3 • L/1000) µmU3 = (3 + 4 • L/1000) µm(L in mm)Q-6Rapp Industrial Sales888 789-7277