Metrology Equipment Catalog - Rapp Industrial Sales

O P T I C A L M E A S U R E M E N TO P T I C A L M E A S U R E M E N TTESA-VISIO 300Manual or automatic video-based machines with unique design for noncontactmeasurement.The manual version comes with TESA-VISTA – the software for metrology applications inthe world of industry . Made simple to use, this machine version can also be equipped withPC-Dmis that provides Users with a powerful tool for 2D or 3D part inspection.Running the PC-DMIS-Vision software, the DCC machine version is capable to operateautomatically. This variant is one the most cost-effective machines of this kind availabletoday on the market.Main vision machine3All aluminiumrigidconstructionMeasuring systemwith incremental,glass scales,opto-electronic. Resolutionto 0,05 µm.In onecoordinatedirection:Manual versionX/Y-axes (3+10 l L/1000) µm,Z-axis (3+2 l L/100) µm*DCC versionX/Y-axes (2,4+4 l L/1000) µm,Z-axis (3+1 l L/100) µm*L in mm* Accuracy was obtained athighest magnification on atextured surface.Also with an evenly distributedworkload of 3 kg atglass plate level.Measuringvolume:X = 300 mm,Y = 200 mm, Z = 150 mmCCD colour camera, analoguePAL 640 x 480 pixelsKey Features• Small-sized vision machine with ergonomic design, whether manuallyoperated or motor driven.• Motorised zoom with magnifications from 20x up to 130x or even more depending on the size of theviewing screen.• Light sources through LEDs so that the measured values are not affected.• Incident light (episcopic) through a dual line consisting of 24 LEDsfragmented into 4 segments (Fresnel lens), each programmableindividually. Also with brightness adjustable over the software.Coaxial illumination available as an option.• Transmitted light (diascopic) through a green LED with adjustablebrightness.• Laser pointer (class 1) for locating the measurement area.• Coordinate stage equipped with incremental glass scales, opto-electronic. Resolution to 0,05 µm.– Measuring volume X = 300 mm, Y = 200 mm, Z = 150 mm.– Quick release system in both X and Y axes (manual version).– Possible displacement in the two X and Z coordinate directions for right hand and left hand operator.– Max. permissible workload: 16 kg.• TFT monitor 17’’• TESA-VISTA or PC-Dmis application software with edge detector.P-18Rapp Industrial Sales888 789-7277Resolution0,001 mmTransmittedlight throughgreen LED,brightness adjustable overthe software10°C to 40°C20°C80%,non-condensing115 to 230 Vac±10%,50 to 60 Hz72 kg (manual)80 kg (DCC)IP40EN 61010-1EN 60204EN 61336-1EN 60825-1IdentificationnumberInspectionreport with adeclaration ofconformityProvidedfullyassembledShippingpackaging