Metrology Equipment Catalog - Rapp Industrial Sales

M E A S U R I N G S TA N D S A N D AU X I L I A RY F I X T U R E SThread, Center, Rolling Mill and Wire Gages599-716 44527 29° Screw Thread Tool GageAcme Standard. Hardened. Provides astandard for grinding thread tools. Has 29°included angle.599-694 44523 U.S. Standard Gage0 to 36. Hardened. Recognized standard in U.S.for uncoated sheet and plate iron and steelDecimal equivalents on reverse side.599-688-1* 44520 Brown & Sharpe Wire Gage*American Standard - The generally acceptedstandard for nonferrous metals. 0 to 36.Hardened. Decimal equivalents stamped onreverse side. Screw Slotting Cutters also madeto this gage.599-650-1 44460 Center Gage-InchTempered. Satin-chrome finish. 60° angles forUnified, American, American National and U.S.Standard Threads. Graduated 14, 20, 24 and 32divisions per inch. Shows double depth ofthreads.599-652-10 44461 Center Gage-MetricTempered, chrome finish. 60° angles for metricISO threads. Graduated two edges. 1 mm and0.5 mm.599-716599-694599-650-1M E A S U R I N G S TA N D S A N D A U X I L I A RY F I X T U R E S* Similar to No. 694 photoTwist Drill Gages599-652-10599-707 599-710599-707 44525 Twist Drill and Machine Screw TapGage (Chrome Plated)1 to 60. Hole sizes tested for accuracyafter hardening. Table gives tap size,pitch,and drill sizes for tap. For Unified andAmerican as well as older AmericanNational or U.S. Standard. Threads6-1/8" x 2-3/8" x 1/16".599-710 45526 Jobber’s Drill GageSimilar to No. 707, (left). For twist drillsfrom 1/16" to 1/2” by 64ths. Hole sizestested for accuracy after hardening.Decimal equivalents stamped on frontside. 6-1/4" x 2-3/8" x 1/16".Rapp Industrial Sales888 789-7277H-29