Metrology Equipment Catalog - Rapp Industrial Sales

O P T I C A L M E A S U R E M E N TMeasurement CapabilitySTATIC– Diameters, Lengths, Intersections, Gage Diameters, Radii, Angles, etc.– workpiece alignment – creation of workpiece reference axis from two diameters.DYNAMIC– Concentricity – parallel, max. form and gauge diameters, interrupted diameters, taper andparallel thread profile axes.– Runout – plain, interrupted diameters and face runout.– Roundness and Cylindricity (available as option).– Diameter with rotation – ovality, max. min. average diameter of plain or interrupted diameters.– Hexagon – across flats dimension, symmetry of flats to axis, max dimension across corners.– Section analysis with rotation – max. and min. section radius and angular locations.– Offset diameters – eccentricity and symmetry.– 3D workpiece alignment – creation of workpiece reference axis from plain diameters andthread profiles.O P T I C A L M E A S U R E M E N TTHREAD MEASUREMENT (without slewing mechanism)– Parallel vee-form – major, minor and pitch diameters, pitch, flank angles.– Taper threads – major and pitch diameters at any location, pitch, taper, flank angles, gagelength, useable thread length,crest and root profiles.IMAGE analysis– A software filter which can be set at different levels to reduce the affect ofcontamination on the workpiece.SPECIFICATIONS TESA SCAN 130MEASURING CAPACITY Diameter 130 mm 5.1“Length 800 mm 31.5“COMPONENT CAPACITY Diameter 248 mm 9.76“Length 850 mm 33.5“Weight 30 kg 66 lbsACCURACY Diameter 2.0+(0.01D) µm (0.08+0.01D)/1000“(20 °C ± 1 °C) Length 8+(0.01L) µm (0.3+0.01L)/1000“RESOLUTION Diameter 0.0003 mm 0.00001“Length 0.001 mm 0.00004“REPEATABILITY Diameter ± 0.0015 mm ± 0.00006“± 2 s = 95% Length ± 0.005 mm ± 0.0002“SPEED Diameter 1,5 secStatic measurement Edge 1,5 secDIMENSIONS (h x w x d) Measuring unit 224 x 99 x 95 cmWEIGHT Complete system 700 kg 1540 lbOPERATING CONDITIONS Temperature 10-35 °C 50-95 °FRelative humidity 10-80% 10-80%ELECTRICAL SERVICEAIR PRESSURE100/110 - 220/240 VAC and 50/60 Hz6 barsPerformance data is based on results from clean ground components at 20 °Cand may be affected by component shape and surface finish.Rapp Industrial Sales888 789-7277P-11