SonicWALL Global VPN Client

More documents

Recommendations

Info

Entering a Pre-Shared KeyDepending on the attributes for the VPN connection policy, if no default Pre-Shared Key isused, you must have a Pre-Shared Key provided by the gateway administrator in order to makeyour VPN connection. If the default Pre-Shared Key is not included as part of the connectionpolicy download or file, the Enter Pre-Shared Key dialog box appears to prompt you for thePre-Shared key before establishing the VPN connection.1. Type your Pre-Shared Key in the Pre-shared Key field. The Pre-Shared Key is masked forsecurity purposes.2. If you want to make sure you’re entering the correct Pre-Shared Key, check Don’t hide thepre-shared key. The Pre-Shared Key you enter appears unmasked in the Pre-shared Keyfield.3. By default, the Remember this Pre-shared Key setting is checked allowing the GlobalVPN Client to save the key in an encrypted file to automatically send when enabling theVPN connection. Unchecking this setting displays the Enter Pre-Shared Key dialog boxevery time you enable the VPN connection to enter the Pre-Shared Key.4. Click OK.Selecting a CertificateIf the SonicWALL VPN Gateway requires a Digital Certificate to establish your identity for theVPN connection, the Select Certificate dialog box appears. This dialog box lists all theavailable certificates installed on your Global VPN Client. Select the certificate from the menu,then click OK. If you have a certificate that has not been imported into the Global VPN Clientusing Certificate Manager, click Import Certificate.Note! See “Managing Certificates” on page 38 for more information on using the CertificateManager.SonicWALL Global VPN Client 2.1 Administrator’s Guide Page 23
Username and Password AuthenticationThe VPN gateway typically specifies the use of XAUTH for determining GroupVPN policymembership by requiring a username and password either for authentication against thegateway’s internal user database or via an external RADIUS service.If the SonicWALL VPN gateway is provisioned to prompt you for the username and passwordto enter the remote network, the Enter Username and Password dialog box appears. Typeyour username and password. If permitted by the gateway, check Remember Username andPassword to cache your username and password to automatically log in for future VPNconnections. Click OK to continue with establishing your VPN connection.Connection WarningIf the VPN connection policy allows only traffic to the gateway, the Connection Warningmessage appears, warning you that only network traffic destined for the remote network at theother end of the VPN tunnel is allowed. Any network traffic destined for local network interfaceand Internet is blocked.You can disable the Connection Warning message from displaying every time you enable theVPN connection by checking If yes, don’t show this dialog box again. Click Yes to continuewith establishing your VPN connection.Page 24 SonicWALL Global VPN Client 2.1 Administrator’s Guide
Page 11: DISCLAIMER OF LIABILITY. SONICWALL'
Page 15 and 16: 7. Click Install. The Setup Wizard
Page 17 and 18: VPN Connection PoliciesThe Global V
Page 19 and 20: 3. In the Choose Scenario page, sel
Page 21 and 22: Importing a VPN Configuration FileA
Page 24 and 25: You can open the SonicWALL Global V
Page 26 and 27: Enabling a VPN ConnectionEnabling a
Page 30 and 31: Disabling a VPN ConnectionDisabling
Page 32 and 33: Specifying Global VPN Client Launch
Page 34 and 35: GeneralThe General page in the Conn
Page 36 and 37: User AuthenticationThe User Authent
Page 38 and 39: Peer Information Dialog BoxThe Peer
Page 40 and 41: • Advanced Packet Transmission Se
Page 42 and 43: Managing VPN Connection PoliciesThe
Page 44 and 45: Troubleshooting SonicWALL Global VP
Page 46 and 47: Setting Up Log FilesThe Auto-Loggin
Page 48 and 49: Technical SupportSelecting Help>Tec
Page 50 and 51: .Table 1: IPSec VPN and Global VPN
Page 52 and 53: SOFTWARE LICENSE AGREEMENT FORSONIC
Page 54 and 55: SOFTWARE PRODUCT is an upgrade of a
Page 56 and 57: SonicWALL Global VPN Client Support
Page 58 and 59: Deploying the default.rcf FileThere
Page 60 and 61: Default.rcf File Tag DescriptionsTh
Page 62 and 63: 00.0.0.033 (Defines the second conn
Page 64 and 65: To verify if a silent installation
Page 66 and 67: Appendix C - Running the Global VPN
Page 68 and 69: Appendix E- Log Viewer MessagesThe
Page 70 and 71: Table 2: Log Viewer MessagesERRORER
Page 78 and 79:
Table 2: Log Viewer MessagesINFOINF
Page 80 and 81:
Table 2: Log Viewer MessagesINFOINF
Page 82 and 83:
Table 2: Log Viewer MessagesWARNING
Page 84 and 85:
AAdding VPN Connection Policies 11D
show all

SonicWALL Global VPN Client

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?