SonicWALL Global VPN Client

More documents

Recommendations

Info

Default.rcf File Tag DescriptionsThe following describes the tags used in the default.rcf file. Defines the connection profiles in the Default.rcf configuration file. There isno hard limit defined on the number of connection profiles allowed. Provides a name for the VPN connection thatappears in the Global VPN Client window. description text Provides a description for eachconnection profile that appears when the user moves the mouse pointer over the VPNPolicy in the Global VPN Client window. The maximum number of characters for the tag is 1023.Off=0/On=1 Enables this connection when program islaunched.Off=0/On=1 Starts IKE negotiation as soon as theconnection is enabled without waiting for network traffic. If disabled then only traffic to thedestination network(s) will initiate IKE negotiations.Off=0/On=1 Enables the connection whencomputer is coming out of sleep or hibernation.Disable=0/Enable=1 Forces launchlogin script. Defines the peer settings for a VPN connection. A VPN connection can support up to5 peers.IP Address/Domain Name The IP address or Domain name ofthe SonicWALL gateway.Off=0/On=1 Enablesdetection if the Peer stops responding to traffic. This will send Vendor ID to the SonicWALLduring IKE negotiation to enable Dead peer detection heart beat traffic.Off=0/On=1 Forces NAT traversal evenwithout a NAT device in the middle. Normally NAT devices in the middle are automaticallydetected and UDP encapsulation of IPSEC traffic starts after IKE negotiation is complete.IP AddressThe IP Address of the next hop for this connection. Thisis ONLY used if there is a need to use a next hop that is different from the default gateway.3 Defines timeout value in seconds for packet retransmissions. Theminimum value is 1 second and the maximum value is 10 seconds.3Number of times to retry packet retransmissions before theconnection is considered as dead. The minimum value is 1 and the maximumvalue is 10.SonicWALL Global VPN Client 2.1 Administrator’s Guide Page 55
Connection automatically selected based on link and IP detection=0/Connection always uses LAN=1/Connection always uses Dial-Up=2Forces the interface selection for the VPN connection. For redundant gateways on this connection, repeat all the tags under . Therecan up to 5 redundant gateways for each connection. Defines the end of each connection profile in the configuration file. Defines the end of all connection profiles in the Default.rcf file.Sample Default.rcf FileThe following is an example of a Default.rcf file. This file includes two VPN connections:Corporate Firewall and Overseas Office. The Corporate Firewall connection configurationincludes two peer entries for redundant VPN connectivity. (Defines the first connection)This is the corporate firewall. Call 1-800-fix-today for problems withconnections.010 (Defines the first VPN peer)10.0.79.101100.0.0.033 (Defines the second VPN peer)Redundant.acme.com1Page 56 SonicWALL Global VPN Client 2.1 Administrator’s Guide
Page 11: DISCLAIMER OF LIABILITY. SONICWALL'
Page 15 and 16: 7. Click Install. The Setup Wizard
Page 17 and 18: VPN Connection PoliciesThe Global V
Page 19 and 20: 3. In the Choose Scenario page, sel
Page 21 and 22: Importing a VPN Configuration FileA
Page 24 and 25: You can open the SonicWALL Global V
Page 26 and 27: Enabling a VPN ConnectionEnabling a
Page 28 and 29: Entering a Pre-Shared KeyDepending
Page 30 and 31: Disabling a VPN ConnectionDisabling
Page 32 and 33: Specifying Global VPN Client Launch
Page 34 and 35: GeneralThe General page in the Conn
Page 36 and 37: User AuthenticationThe User Authent
Page 38 and 39: Peer Information Dialog BoxThe Peer
Page 40 and 41: • Advanced Packet Transmission Se
Page 42 and 43: Managing VPN Connection PoliciesThe
Page 44 and 45: Troubleshooting SonicWALL Global VP
Page 46 and 47: Setting Up Log FilesThe Auto-Loggin
Page 48 and 49: Technical SupportSelecting Help>Tec
Page 50 and 51: .Table 1: IPSec VPN and Global VPN
Page 52 and 53: SOFTWARE LICENSE AGREEMENT FORSONIC
Page 54 and 55: SOFTWARE PRODUCT is an upgrade of a
Page 56 and 57: SonicWALL Global VPN Client Support
Page 58 and 59: Deploying the default.rcf FileThere
Page 62 and 63: 00.0.0.033 (Defines the second conn
Page 64 and 65: To verify if a silent installation
Page 66 and 67: Appendix C - Running the Global VPN
Page 68 and 69: Appendix E- Log Viewer MessagesThe
Page 70 and 71: Table 2: Log Viewer MessagesERRORER
Page 78 and 79: Table 2: Log Viewer MessagesINFOINF
Page 80 and 81: Table 2: Log Viewer MessagesINFOINF
Page 82 and 83: Table 2: Log Viewer MessagesWARNING
Page 84 and 85: AAdding VPN Connection Policies 11D

SonicWALL Global VPN Client

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?