OPERATOR'S MANUAL BIOPROtect II Vent to ... - Baker Company
OPERATOR'S MANUAL BIOPROtect II Vent to ... - Baker Company
OPERATOR'S MANUAL BIOPROtect II Vent to ... - Baker Company
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
If the fluorescent light does not work -1. Make sure that the light switch is turned on.The indica<strong>to</strong>r on the pushbut<strong>to</strong>n should be illuminated.2. Make certain that the bulbs are installed properly in<strong>to</strong> the clips.3. Open the light canopy and check the multi-pin connec<strong>to</strong>rs at each end <strong>to</strong> be sure they are securelyengaged. If the lamp flickers, there is probably an improper ground.The wiring can be traced <strong>to</strong> thesource of a break.Page 25 of 54
Change language