2003 Annual Report - Enerflex

By working together, the Enerflex group ofcompanies is able to offer our clientscompletely integrated solutions to fit theiroil and gas production needs.Compression-Dehydration Facility• Presson was responsible for coordinating the design of the site plot plan, pipe racks andinterconnecting piping and equipment foundation design.• In the first phase, Presson designed and supervised installation of all of the necessary equipment fortreatment of the gas to meet sales requirements.• Presson fabricated and supplied all process vessels, piping and valves.• All components for the plant were built as individual packages that could be connected when deliveredto the plant site.• The compressor package was designed by EFX Compression in Calgary. It consists of an Ariel modelJGK/4 reciprocating compressor driven by a Waukesha L7042GSI turbocharged, 12 cylinder natural gasfueledengine, delivering 1,478 horsepower. The components are mounted on a single-piece steel skidand controlled by a model RC2000 control system. The skid-mounted control system was designedand supplied by our Syntech division.• The Syntech division supplied a fully furnished, multi-room modular trailer housing a motor controlcenter, automatic power transfer switch, uninterruptible power supply (UPS) system, programmablelogic controller (PLC) system, and two computer workstations for human-machine interface.• A high pressure vent stack with integral knockout drum utilizing a water seal and manual CO 2 snuffingsystem was fabricated by the Mactronic division at its facility in Red Deer, Alberta.Enerflex 2003 Annual Report33