Couplings - Eoss.com

Grooved Copper – CouplingsVic-Flange AdapterSTYLE 641-CTSFor Complete InformationRequest Publication 22.03Size Sealing Surface DimensionsActualmmNominalInchesAMaximummmInchesBMinimummmInchesWmmInchesXmmInchesYmmInchesZmmInchesApprox.Weight Each54.0 54 81 175 152 121 20 1.72 2.13 3.20 6.88 6.00 4.75 0.78 3.866.7 67 99 200 178 140 22 2.12 1/2 2.63 3.91 7.88 7.00 5.50 0.88 4.779.4 80 115 214 191 152 24 2.53 3.13 4.53 8.44 7.50 6.00 0.94 5.4104.8 105 140 253 229 191 24 3.54 4.13 5.53 9.94 9.00 7.50 0.94 7.7130.2 130 170 279 254 216 25 4.25 5.13 6.71 11.00 10.00 8.50 1.00 9.3155.6 156 198 305 279 241 25 4.76 6.13 7.78 12.00 11.00 9.50 1.00 10.3kgLbs.• Direct connection fromflanged components togrooved copper tubing• Integral tabs ease handlingXABZY WIMPORTANT NOTES:Style 641-CTS Vic-Flange adapters for copper tubing provide rigid jointswhen used on copper tubing that is roll grooved to Victaulic dimensionsand consequently allow no linear or angular movement at the joint.For restrictions on where and how Vic-Flange adapters and flangewasherscanbeused,refertoPublication22.03.• Sizes from54.0–155.6mm/2–6"to fit K, L, M, or DWVcopper tubing (CTS)Vic-Flange AdapterSTYLE 641-EN1057For Complete InformationRequest Publication 22.11• Direct connection fromflanged components togrooved copper tubing• Integral tabs ease handling• Sizes from54.0–159.0mm/2–6"to fit copper tubing(EN1057)TYPICAL FOR ALL SIZESOrange area of mating face mustbe free from gouges, undulationsor deformities of any typefor effective sealing.Size Sealing Surface DimensionsActualmmNominalInchesAMaximummmInchesBMinimummmInchesWmmInchesXmmInchesYmmInchesZmmInchesApprox.Weight Each54.0 54 78 175 152 125 20 1.72.125 2.13 3.07 6.89 6.00 4.92 0.78 3.7564.0 64 89 214 185 145 22 2.12.250 2.25 3.50 8.43 7.28 5.71 0.88 4.6366.7 67 92 200 178 145 22 2.12.625 2.64 3.62 7.87 7.00 5.71 0.88 4.6376.1 76 101 208 185 145 20 2.53.000 2.99 3.98 8.19 7.28 5.71 0.78 5.5176.1 76 101 215 200 160 22 2.53.000 2.99 3.98 8.48 7.87 6.30 0.88 5.5188.9 89 114 220 200 160 22 2.83.500 3.50 4.49 8.66 7.87 6.30 0.88 6.20108.0 108 133 243 220 180 24 3.14.250 4.25 5.24 9.57 8.66 7.09 0.94 6.84133.0 133 160 274 249 210 25 3.95.236 5.24 6.30 10.78 9.84 8.27 1.00 8.60159.0 159 186 307 285 240 26 4.56.260 6.26 7.32 12.09 11.22 9.45 1.02 9.92XABZY WIMPORTANT NOTES:Style 641-EN1057 Vic-Flange adapters for copper tubing providerigid joints when used on copper tubing that is roll grooved toVictaulic dimensions and consequently allow no linear or angularmovement at the joint.For restrictions on where and how Vic-Flange adapters and flangewasherscanbeused,refertoPublication22.11.kgLbs.SECTION 11: GROOVED COPPERTYPICAL FOR ALL SIZESOrange area of mating face mustbe free from gouges, undulationsor deformities of any typefor effective sealing.WWW.VICTAULIC.COM 11-6