Couplings - Eoss.com

Fittings• Fittings available in sizes through 1200 mm/48"• Standard fitting pressure ratings conform to ratingsof Style 77 coupling• All fittings supplied with grooves or shouldersfor fast installation• Groove design permits flexibility for easy alignment(these fittings are not intended for use with Victauliccouplings for plain end pipe – refer to Publication14.04 for fittings available for plain end pipe)• Paintedorangeenamelwithoptionalgalvanizedfinish• When connecting wafer or lug-type butterfly valves directlyto Victaulic fittings with 741 or 743 Vic-Flange adapters,check disk clearance dimensions with I.D. dimension of fitting• Request Publication 07.01Advanced Groove SystemFor350–600mm/14–24"pipingsystemsVictaulicoffersAdvancedGrooveSystem(AGS)fittings, see pg.5-1.ElbowsTees, Crosses, Wyes, and LateralsSECTION 2: FITTINGS90° ElbowNO. 10, PG.2-3AGS NO. W10, PG. 5-590° 1½D LongRadius ElbowNO. 100, PG.2-3AGSNO. W100,PG.5-590°3DLongRadius ElbowNO. 100-3D, PG.2-4TeeNO. 20, PG.2-6AGS NO. W20, PG. 5-5CrossNO. 35, PG.2-6AGS NO. W35, PG. 5-5True WyeNO. 33, PG.2-6AGS NO. W33, PG. 5-545° ElbowNO. 11, PG.2-3AGS NO. W11, PG. 5-545° 1½D LongRadius ElbowNO. 110, PG.2-3AGSNO. W110,PG.5-545° 3D LongRadius ElbowNO. 110-3D, PG.2-4Tees withThreaded BranchNO. 29M, PG.2-6Reducing TeeNO. 25, PG.2-7AGS NO. W25, PG. 5-6Reducing Tee withThreaded BranchNO. 29, PG.2-722½° ElbowNO. 12, PG.2-3AGS NO. W12, PG. 5-5Reducing BaseSupport ElbowGrv.×Grv.NO. R-10G, PG.2-490° Adapter ElbowNO.18, PG.2-5Standpipe TeeNO. 27, PG.2-845° LateralNO. 30, PG.2-9AGS NO. W30, PG. 5-745° Reducing LateralNO. 30-R, PG.2-9AGS NO. W30-R, PG. 5-711 ¼º ElbowNO. 13, PG.2-3AGS NO. W13, PG. 5-5Reducing BaseSupport ElbowGrv.×FlangeNO. R-10F, PG.2-445° Adapter ElbowNO. 19, PG.2-5Bullhead TeeNO. 21, PG.2-8Tee WyeNO. 32, PG.2-10Reducing Tee WyeNO. 32-R, PG.2-102-1WWW.VICTAULIC.COM