Couplings - Eoss.com

More documents

Recommendations

Info

Pipe Preparation – Roll Grooving ToolsPlant/ShopFabricationFor Complete InformationRequest Publication 24.01VE268• Designed for fabrication shop roll grooving• The fully-motorized, semi-automatic, electro-hydraulic tool comes complete with safety guardsand safety foot switch• Equipped with a unique pivot arm design, making roll changes quick and easy,without removing shafts• Patented enhanced tracking rolls reduce pipe “walk-off”• Roll grooves 20 –300mm/¾ –12" pipe †Drive Requirements: Self-containedWeight: 333kg/735lbs.Optional Rolls: Optional rolls are available for carbon steel Schedules 5, 10, and 40; copper rollsfor type K, L, M and DWV; and stainless steel Rx rolls for Schedules 5S, 10, and 10S.Optional Accessories: An optional pipe stabilizer for 200 – 300 mm/8 – 12" pipe is available.VE268VE414MCVE414MC• Designed for fabrication shop roll grooving Schedule 5, 10, and standard wall carbon steel pipe,standard wall stainless steel pipe, Schedule 40, 80 PVC pipe, and standard wall aluminum pipe• Unique roll design, making roll changing quick and easy, without removing main shafts• Patented enhanced tracking rolls reduce pipe “walk-off”• The tool comes equipped with pipe stabilizers to provide smooth grooving operation• Roll grooves 50 –400mm/2 –16" pipe †Drive Requirements: Self-containedWeight: 333kg/735lbs.Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe,and type K, L, M and DWV copper tubing. Roll sets also available for 350 – 400 mm/14 – 16"std. wall carbon steel pipe for use with the AGS system.Optional Accessories: The tool can also be supplied in various voltages, contact Victaulic for details.SECTION 15: PIPE PREPARATIONVE436MCVE436MC• Fully automated shop tool for roll grooving standard wall (9.5 mm/.375" wall maximum) pipe• The fully-motorized, semi-automatic, electro-hydraulic tool comes complete with safety guardsand safety foot switch• Patented enhanced tracking rolls reduce pipe “walk-off”• Roll grooves 100 – 900 mm/4 – 36" pipe †Power Requirements: 220/440 volt, 3 phase, 60 Hz (shipped wired for 220 voltunless otherwise specified)Weight: 680kg/1500lbs.Optional Rolls: Optional roll kits are available for grooving 50 – 900 mm/26 – 36"(12.7mm/.500" wall maximum). Also, a 1050 mm/42" roll kit is available.Contact Victaulic for details. Stainless steel Rx rolls for Schedules 5S, 10 and 10S.†Refer to Roll Grooving Tool Ratings chart on pgs. 15-6, 15-715-5WWW.VICTAULIC.COM
Pipe Preparation – Roll GroovingVic-Easy ® RollGrooving Tool RatingsToolModelPipeMaterial20¾251321¼401½502652½Pipe Size/Schedule mm/Inches803903½10041204½12551506200825010300123501440016(MAXIMUM CAPACITY)Steel 5, 10 5 – 40Victaulic Vic-Easy roll grooving tools aredesigned to cold form grooves into thespecified pipe to meet ANSI/AWWAC-606 and other standards and the groovedimensions specified in Victaulic GrooveSpecifications for each type of pipe.These tools are designed for roll groovingpipe. To accomplish this function requiressome dexterity and mechanical skills, aswell as sound safety habits. Although thistool is manufactured for safe dependableoperation, it is impossible to anticipatethose combinations of circumstanceswhich could result in an accident. Theoperator is cautioned to always practice“Safety First” during each phase of use,including setup and maintenance ofthese units.Read and understand the Tool Operatingand Maintenance Instruction Manualprovided with each tool before operatingor performing maintenance on tools.Become familiar with the tool’s operations,applications and limitations. Be particularlyaware of its specific hazards.IMPORTANT NOTES:• PVC grades that can be grooved –PVC Type I Grade I – PVC 1120;PVC Type I Grade II – PVC 1220;PVC Type II Grade I – PVC 2116.• Copper/nickel pipe –Contact Victaulic for details.Note: Vic-Easy tools and rolls shownon this chart will produce grooves inaccordance with Victaulic Roll GrooveDimension charts and to ANSI/AWWAC-606 standards.VE12VE26SStainless40S onlyAluminum † 5, 10 5 – 40PVC Plastic 40Steel 5 – 40 5, 10Stainless40S onlyAluminum † 5 – 40 5, 10VE26PPVC Plastic 40VE26C Copper K, L, M, DWV Copper Rolls ‡VE26SS Lt. Wall SS 5S, 10S Rx Rolls #VE46VE46PVE226SVE226PVE226BSteel 5 – 40Stainless40S onlyAluminum † 5 – 40PVC Plastic 40 40, 80Steel 5 – 40 5, 10Stainless40S onlyAluminum † 5 – 40 5, 10PVC Plastic 40, 80 40Steel 5 – 40Stainless40S onlyAluminum † 5 – 40PVC Plastic 40 40, 80Steel 5 – 40 5, 10VE226MStainless40S onlyVE226C Copper K, L, M, DWV Copper Rolls ‡VE226BSS Lt. Wall SS 5S, 10S Rx Rolls #VE226MSS Lt. Wall SS 5S, 10S Rx Rolls #Steel 5 – 40 Standard Rolls §VE107Stainless 40S Standard Rolls §Lt. Wall SS 5S, 10S Rx Rolls #Copper K, L, M, DWV Copper Rolls ‡Steel 5 – 40S Standard Rolls § 5–20 Std.Stainless 40S Standard Rolls §VE273SFSLt. Wall SS 5S, 10S Rx Rolls #Aluminum † 5 – 40 RP Rolls ◊ 5–20 RP◊PVC Plastic 40 RP Rolls ◊ 40, 80 RP Rolls ◊40RP◊Copper K, L, M, DWV Copper Rolls ‡VE271FSDSteel 5 – 40S Standard Rolls § 5–20 Std.Stainless 40S Standard Rolls §Lt. Wall SS 5S, 10S Rx Rolls #Aluminum † 5 – 40 RP Rolls ◊ 5–20 RP◊PVC Plastic 40 RP Rolls ◊ 40, 80 RP Rolls ◊40RP◊Copper K, L, M, DWV Copper Rolls ‡TABLE CONTINUED ON PG. 15-7# Rx Rolls – “Rx” is the Victaulic part code designator for grooving roll sets specifically designed for roll grooving lightwall stainless steel pipe.† 6061-T4 or 6063-T4 alloy must be used.‡ Alternate units are available for European Standard (EN) 1057 and Australian Standard Copper.§ Standard Rolls – This is the Victaulic designation for grooving roll sets used primary for steel pipe. Also used for Schedule 40S stainless steel pipe.◊ RP Rolls – “RP” is the Victaulic part code designator for grooving roll sets specifically designed for roll grooving PVC plastic pipe and aluminum pipe.SECTION 15: PIPE PREPARATIONWWW.VICTAULIC.COM 15-6
Page 3 and 4:
Multiple markets servedVictaulic pi
Page 5 and 6:
UNITED ARABEMIRATESJumeirah Burj Al
Page 7 and 8:
FeaturesReinventing InnovationThe r
Page 9 and 10:
GENERAL CODE GROUPS,ASSOCIATIONS, L
Page 11:
Design DataNoticeThe technical and
Page 15 and 16:
CouplingsGasket TypesGasket TypeSty
Page 17 and 18:
CouplingsFlexible Coupling Systems
Page 19 and 20:
CouplingsStandard FlexibleCouplingS
Page 21 and 22:
CouplingsFlexible CouplingSTYLE 75F
Page 23 and 24:
CouplingsVic-Flange AdapterANSI Cla
Page 25 and 26:
CouplingsReducing CouplingSTYLE 750
Page 27 and 28:
CouplingsOutlet CouplingSTYLE 72For
Page 29 and 30:
CouplingsRigid CouplingSTYLE HP-70F
Page 31 and 32:
CouplingsEndSeal Fittings for Pipe
Page 33 and 34:
FittingsAlternate Style Fittings Ma
Page 35 and 36:
FittingsLong Radius Elbow 3DWithadd
Page 37 and 38:
FittingsTees, Crosses and True Wyes
Page 39 and 40:
FittingsReducing TeeNO. 25 Grooved
Page 41 and 42:
FittingsTee WyeReducing Tee WyeNO.
Page 43 and 44:
FittingsFlanged Adapter NippleNO. 4
Page 45 and 46:
FittingsFemale Threaded AdapterHose
Page 47 and 48:
FittingsSmall Threaded ReducerNO. 5
Page 49 and 50:
ValvesValve Application GuideValve
Page 51:
Valves - Butterfly ValvesVic-300 Ma
Page 56 and 57:
Valves - Check ValvesSECTION 3: VAL
Page 58 and 59:
Valves - Check ValvesSwinger ® Swi
Page 60 and 61:
Valves - Ball ValvesVic-Ball ValveS
Page 62 and 63:
AccessoriesSECTION 4: ACCESSORIES
Page 64 and 65:
AccessoriesSECTION 4: ACCESSORIESSe
Page 66 and 67:
AccessoriesSECTION 4: ACCESSORIESSu
Page 68 and 69:
AccessoriesSECTION 4: ACCESSORIESSu
Page 70 and 71:
AccessoriesSECTION 4: ACCESSORIESVi
Page 72 and 73:
AccessoriesSECTION 4: ACCESSORIESMo
Page 74 and 75:
AccessoriesSECTION 4: ACCESSORIESDi
Page 76 and 77:
Advanced Groove SystemVictaulic off
Page 78 and 79:
Advanced Groove System - CouplingsS
Page 80 and 81:
Advanced Groove System - FittingsEl
Page 82 and 83:
Advanced Groove System - Fittings45
Page 84 and 85:
Advanced Groove System - FittingsCo
Page 86 and 87:
Advanced Groove System - ValvesVic-
Page 88 and 89:
Advanced Groove System - Accessorie
Page 90 and 91:
Hole Cut Piping System• Victaulic
Page 92 and 93:
Hole Cut Piping SystemSECTION 6: HO
Page 94 and 95:
Hole Cut Piping SystemVic-LetStrapl
Page 96 and 97:
Plain End Piping SystemSECTION 7: P
Page 98 and 99:
Plain End Piping System - Couplings
Page 100 and 101:
Plain End Piping System - FittingsT
Page 102 and 103:
Plain End Piping System - FittingsS
Page 104 and 105:
GroovedSystemforStainlessSteel Pipe
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115: GroovedSystemforStainlessSteel Pipe
Page 120 and 121: Pressfit System for Stainless Steel
Page 132 and 133: Plain End Piping System for HDPE Pi
Page 134 and 135: Plain End Piping System for HDPE Pi
Page 136 and 137: Grooved Copper• Cold formed syste
Page 138 and 139: Grooved Copper - CouplingsPerforman
Page 140 and 141: Grooved Copper - CouplingsPerforman
Page 142 and 143: Grooved Copper - CouplingsSECTION 1
Page 144 and 145: Grooved Copper - FittingsElbows, Te
Page 146 and 147: Grooved Copper - FittingsConcentric
Page 148 and 149: Grooved Copper - ValvesButterfly Va
Page 150 and 151: Depend-O-Lok SystemThe Depend-O-Lok
Page 152 and 153: GasketsVictaulic gaskets are design
Page 154 and 155: GasketsSECTION 14: GASKETSGasket Pe
Page 156 and 157: GasketsGasket SelectionGuideWARNING
Page 158 and 159: GasketsSECTION 14: GASKETSChemical
Page 160 and 161: Pipe PreparationRoll GrooveA BA BRo
Page 162 and 163: Pipe Preparation - Roll Grooving To
Page 166 and 167: Pipe Preparation - Roll GroovingSEC
Page 168 and 169: Pipe Preparation - Cut Grooving Too
Page 170 and 171: Pipe Preparation - Pipe Cutting Too
Page 172 and 173: Pipe Preparation - AccessoriesAdjus
Page 174 and 175: Pipe PreparationSECTION 15: PIPE PR
Page 176 and 177: Pipe PreparationGroove DimensionsRO
Page 178 and 179: Pipe PreparationGroove DimensionsCO
Page 180 and 181: Pipe PreparationGroove DimensionsCO
Page 182 and 183: Pipe PreparationSECTION 15: PIPE PR
Page 184 and 185: Pipe PreparationGroove DimensionsRO
Page 186 and 187: Product IndexSECTION 16: PRODUCT IN
Page 188 and 189: Product IndexSECTION 16: PRODUCT IN
Page 190 and 191: SECTION 3VIC/GUIDE-SPECVICTAULIC PR
Page 192: Piping. Systems. Solutions.www.vict
show all

Couplings - Eoss.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?