Couplings - Eoss.com

Pipe Preparation – Roll GroovingVic-Easy ® RollGrooving Tool RatingsToolModelPipeMaterial20¾251321¼401½502652½Pipe Size/Schedule mm/Inches803903½10041204½12551506200825010300123501440016(MAXIMUM CAPACITY)Steel 5, 10 5 – 40Victaulic Vic-Easy roll grooving tools aredesigned to cold form grooves into thespecified pipe to meet ANSI/AWWAC-606 and other standards and the groovedimensions specified in Victaulic GrooveSpecifications for each type of pipe.These tools are designed for roll groovingpipe. To accomplish this function requiressome dexterity and mechanical skills, aswell as sound safety habits. Although thistool is manufactured for safe dependableoperation, it is impossible to anticipatethose combinations of circumstanceswhich could result in an accident. Theoperator is cautioned to always practice“Safety First” during each phase of use,including setup and maintenance ofthese units.Read and understand the Tool Operatingand Maintenance Instruction Manualprovided with each tool before operatingor performing maintenance on tools.Become familiar with the tool’s operations,applications and limitations. Be particularlyaware of its specific hazards.IMPORTANT NOTES:• PVC grades that can be grooved –PVC Type I Grade I – PVC 1120;PVC Type I Grade II – PVC 1220;PVC Type II Grade I – PVC 2116.• Copper/nickel pipe –Contact Victaulic for details.Note: Vic-Easy tools and rolls shownon this chart will produce grooves inaccordance with Victaulic Roll GrooveDimension charts and to ANSI/AWWAC-606 standards.VE12VE26SStainless40S onlyAluminum † 5, 10 5 – 40PVC Plastic 40Steel 5 – 40 5, 10Stainless40S onlyAluminum † 5 – 40 5, 10VE26PPVC Plastic 40VE26C Copper K, L, M, DWV Copper Rolls ‡VE26SS Lt. Wall SS 5S, 10S Rx Rolls #VE46VE46PVE226SVE226PVE226BSteel 5 – 40Stainless40S onlyAluminum † 5 – 40PVC Plastic 40 40, 80Steel 5 – 40 5, 10Stainless40S onlyAluminum † 5 – 40 5, 10PVC Plastic 40, 80 40Steel 5 – 40Stainless40S onlyAluminum † 5 – 40PVC Plastic 40 40, 80Steel 5 – 40 5, 10VE226MStainless40S onlyVE226C Copper K, L, M, DWV Copper Rolls ‡VE226BSS Lt. Wall SS 5S, 10S Rx Rolls #VE226MSS Lt. Wall SS 5S, 10S Rx Rolls #Steel 5 – 40 Standard Rolls §VE107Stainless 40S Standard Rolls §Lt. Wall SS 5S, 10S Rx Rolls #Copper K, L, M, DWV Copper Rolls ‡Steel 5 – 40S Standard Rolls § 5–20 Std.Stainless 40S Standard Rolls §VE273SFSLt. Wall SS 5S, 10S Rx Rolls #Aluminum † 5 – 40 RP Rolls ◊ 5–20 RP◊PVC Plastic 40 RP Rolls ◊ 40, 80 RP Rolls ◊40RP◊Copper K, L, M, DWV Copper Rolls ‡VE271FSDSteel 5 – 40S Standard Rolls § 5–20 Std.Stainless 40S Standard Rolls §Lt. Wall SS 5S, 10S Rx Rolls #Aluminum † 5 – 40 RP Rolls ◊ 5–20 RP◊PVC Plastic 40 RP Rolls ◊ 40, 80 RP Rolls ◊40RP◊Copper K, L, M, DWV Copper Rolls ‡TABLE CONTINUED ON PG. 15-7# Rx Rolls – “Rx” is the Victaulic part code designator for grooving roll sets specifically designed for roll grooving lightwall stainless steel pipe.† 6061-T4 or 6063-T4 alloy must be used.‡ Alternate units are available for European Standard (EN) 1057 and Australian Standard Copper.§ Standard Rolls – This is the Victaulic designation for grooving roll sets used primary for steel pipe. Also used for Schedule 40S stainless steel pipe.◊ RP Rolls – “RP” is the Victaulic part code designator for grooving roll sets specifically designed for roll grooving PVC plastic pipe and aluminum pipe.SECTION 15: PIPE PREPARATIONWWW.VICTAULIC.COM 15-6