Couplings - Eoss.com

CouplingsSECTION 1: COUPLINGSVic-Flange AdapterANSI Class 300STYLE 743For Complete InformationRequest Publication 06.06• Permits direct connectionof ANSI Class 300 flangedcomponents into a groovedsystem• Designed to mate withraised-face flanges, butcan be used with flat-faceflanges by removing theraised projections on theoutside face of the flange• Pressure rated up to4960kPa/720psi• Sizes from50–300mm/2 – 12"NominalSizemmInchesSizeActualOutside Dia.mmInchesMax. WorkPressure *kPapsiMax. EndLoad *NLbs.AMax.mmInchesSealingSurfaceBMin.mmInchesWmmInchesDimensionsZmmInchesApprox.Wgt. Each50 60.3 4960 14200 60 87 196 24 2.22 2.375 720 3,190 2.38 3.41 7.70 0.93 4.865 73.0 4960 20780 73 99 219 27 3.42 1/2 2.875 720 4,670 2.88 3.91 8.61 1.06 7.480 88.9 4960 30815 89 115 241 30 4.13 3.500 720 6,925 3.50 4.53 9.48 1.18 9.1100 114.3 4960 50930 114 141 288 33 6.94 4.500 720 11,445 4.50 5.53 11.35 1.31 15.3125 141.3 4960 77875 141 171 313 36 8.05 5.563 720 17,500 5.56 6.72 12.31 1.43 17.7150 168.3 4960 110380 168 198 350 38 10.66 6.625 720 24,805 6.63 7.78 13.77 1.50 23.4200 219.1 4960 187100 219 252 424 43 15.68 8.625 720 42,045 8.63 9.94 16.68 1.68 34.3250 273.0 4960 290650 273 313 489 49 21.910 10.750 720 65,315 10.75 12.31 19.25 1.93 48.3300 323.9 4960 408870 324 364 565 52 32.012 12.750 720 91,880 12.75 14.31 22.25 2.06 70.5* Refer to Publication 06.06 for more details.IMPORTANT NOTES:Style 743 Vic-Flange adapters must be ordered as a factory assembly when connected to a Victaulic fitting or valve.Contact Victaulic for details. Total bolts required to be supplied by installer, may be ordered from Victaulic.For restrictions on where and how Vic-Flange adapters and flange washers can be used, refer to Publication 06.06.Remove to mateto flat-facedflanges.A B WTYPICAL FOR ALL SIZESOrange area of mating face mustbe free from gouges, undulationsor deformities of any typefor effective sealing.ZkgLbs.1-22WWW.VICTAULIC.COM