Download - Eurotherm Ltda

AddendumiToolsselecting 'Load Values From File' from the File menu or a device's own popup menu (rightclickon a device faceplate to activate this);changing the file type to 'Custom Linearisation Files (*.mtb)' in the file dialog, and openingthe desired file.iTools ships with a library of pre-defined Linearisation files. By default, these are installedinto the 'Linearisations' sub-folder of the main iTools program folder (e.g.C:\Program Files\Eurotherm\iTools\linearizations).The 2500 device supports three separate custom Linearisation tables. When downloading,you will be prompted to select which of the three tables to write to.Note: the contents of custom Linearisation tables are NOT copied when devices arecloned.a.e.7. OPC ScopeiTools Version 1 included the OPC Explorer as an unsupported utility for device andapplication commissioning. This utility is now called OPC Scope, and is a fully supportedcomponent of iTools.OPC Scope allows parameters from any connected device to be monitored, plotted on asimple trend chart, or logged to file. This data logging capability supports output to CSV ortab-separated files. Both formats have been optimised for loading into Microsoft Excel andother spreadsheet applications.OPC Scope may be launched from within iTools (e.g. from the View menu), or else from theEurotherm iTools program group on the Start menu. OPC Scope may also be launched fromthe toolbar of any Watch/Recipe view; in this case it will automatically be set up to show thesame set of parameters which had been configured in the Watch/Recipe window.a.e.8. Eurotherm Project Studio IntegrationiTools will take advantage of facilities in Eurotherm Project Studio 2000 (where installed) toautomate certain operations:A new Eurotherm iTools Clone file may be created using the Windows Explorer. When thisfile is opened, iTools will normally prompt the user for the type of instrument which thisclone file represents. However, if the folder containing the clone file corresponds to an iToolsdevice within Eurotherm Project Studio, then the clone file will automatically be set up forthat device type.Similarly, when the user selects 'Send To Device' for a clone file, iTools will indicate thecorrect target device in bold text, if the clone file's folder corresponds to a particular devicewithin Eurotherm Project Studio.Contact your local Eurotherm representative for more information about Eurotherm ProjectStudio 2000.a.e.9. InternationalisationiTools Version 1 was available as an English language application only. As of Version 2,iTools may be localised for non-English markets. As well as iTools and the OPC Scope,parameter descriptions for all devices may be translated. Please contact your local Eurothermrepresentative to find out whether iTools has been localised for your market.a-6 User Handbook. Part No HA026179 Issue 2.0 Oct-99