Download - Eurotherm Ltda

AddendumiToolsa. Addendum (Software Version 2.09)A.A. CONTENTS• iTools Editions• Installing iTools• Devices Supported• Changes since Version 1• Possible Problems with this ReleaseA.B. ITOOLS EDITIONSiTools is now available in two different 'Editions' according to the level of functionalityrequired: iTools Standard Edition and iTools Open Edition. A third version, iTools DemoEdition, is provided for evaluation only.It is possible to upgrade from iTools Demo Edition to either Standard or Open Edition bypurchasing a new Product Key from Eurotherm. Similarly, iTools Standard Edition may beupgraded to iTools Open Edition in this way.a.b.1. iTools Demo EditioniTools Demo Edition may be made available for evaluation purposes only.The following functionality is restricted in this edition:Modbus communications to devices is limited to 30 minutes;no cloning or download functionality is available;printing of reports from the iTools Report Wizard is not permitted.a.b.2. iTools Standard EditioniTools Standard Edition offers the full iTools functionality for configuration andcommissioning of Eurotherm devices.Access to the Modbus OPC Server from 3rd-party OPC clients is limited to 30 minutes, as isaccess to 3rd-party OPC servers from the OPC Scope utility. For unlimited access to OLE forProcess Control (OPC) functionality, iTools Open Edition is required.a.b.3. iTools Open EditioniTools Open Edition offers all the features of iTools Standard Edition, as well as providinginteroperability with any software that is compliant with OLE for Process Control (OPC), theindustry standard for data access to real-time devices.In addition to the functionality offered by iTools Standard Edition, the Open Edition allows:unlimted access to the Modbus OPC Server from 3rd-party OPC client applications,including the majority of SCADA software;unlimited access from the OPC Scope utility to 3rd-party OPC servers.a-2 User Handbook. Part No HA026179 Issue 2.0 Oct-99