Download - Eurotherm Ltda

Quick Tour 1iTools3.6. TO CUSTOMISE THE DISPLAYThe display can be customised as follows:From the View menu:9 Toolbar to select the toolbar9 Status Bar to select the status bar9 Panel Views to select instrument views9 Device Browser to select device browser and parameter list headingsFigures 3-1 and 3-2 have been shown with the above views selected. De-select any area ofthe display by clicking the 9. Change the size of an area by clicking the area boundary anddragging the boundary to a new position, (see Figure 3-2).Note: Throughout the remainder of this manual, unless otherwise stated, it will be assumedthat Toolbar, Status Bar and Panel Views are selected.From the Options menu9 Show Device Names To display the name of the clone file or device onthe instrument view9 Show Labels on Toolbar To display the names against toolbar icons9 Active Window Follows Device used when two or more clone files are open.The active parameter list corresponds to theScalingUpdate RatesDecimal PlacesSend Command To ServerClear Most Recently Used ListsSave Settings NowSave Settings on Exitinstrument selectedUsed when a mix of instrument sizes are displayedon the same screen. Instrument views may bedisplayed to scale or changed in size relative to eachotherBy default :’Panel Views’ are updated every 1500ms‘When No Key Pressed’ and every 100ms ‘WhenKey Pressed’.Parameter Lists are updated every 2000msIt is recommended that these settings are onlychanged in very special circumstances, for examplein networked systemsValue will be rounded to the number of decimalplacesTo send a command to a server in networkedsystemsClear the most recently used files from the File andDevice menusSave the customised screen settings when selectedSave the customised screen settings when iTools isclosed3-10 User Handbook. Part No HA026179 Issue 2.0 Oct-99