Download - Eurotherm Ltda

Quick Tour 2iTools3. From the small browserwindow box doubleclick on ConfigFigure 4-2: Small Browser Window4. From the Config list select and double click AL (the Alarm configuration list)Figure 4-3: Selecting a ParameterThis list shows an example of the currentconfiguration for each of up to the fouralarms available in a 2400 instrument.The relevant Installation and OperationHandbook gives a full description of thealarm types available.If the instrument access level isOperator, this list is read only.To configure the parameter type, theinstrument must be in configurationlevel - see Paragraph 4.1.2.5. To configure (or re-configure) the alarm type - double click the parameter nameFrom the dialog box select a new alarm type fromthe list given in the table.A complete list and description of the parametertypes available, together with their mnemonics isgiven in the relevant ‘Installation and OperationHandbook’ for the instrument in use - seeAppendix C.Figure 4-4: Configuring a Parameter TypeThe selected conditions given in the above example, shows Alarm 1 (AL 1) set to aDeviation, DEV, alarm. The number in brackets is the enumeration value for the parameter.6. Set up alarm latching or alarm blocking using the same procedure as described above.4-4 User Handbook. Part No HA026179 Issue 2.0 Oct-99