Download - Eurotherm Ltda

Quick Tour 2iTools4.2.2. To Clone an Instrument from a FileIt is not necessary to have the source instrument connected to the iTools network duringcloning. The configuration details of the source instrument will normally have beenpreviously copied to a file by following steps 1 to 6 of the above procedure.1. If you wish to examine or edit the parameter details press Open Clone from the Toolbaror, from the File menu, select Open Clone File.2. Open a clone file by double clicking on a clone file name or by selecting the clone fileand clicking Open.3. The clone instrument details will be downloaded and displayed in the Panel Viewssection. The instrument parameter values are displayed in white to indicate that this isnot a physically connected instrument. Parameter lists can be viewed in the same way asan actual instrument - see Chapter 34. If you wish to load the clone file directly, eitherFrom the File menu select Send to Device …..select the instrument to be cloned orPoint and click on the instrument to be cloned and from the File menu select LoadValues From File.5. When the file browser window appears select the required clone file and press Open todownloadNote:- When cloning from an instrument or from a file the instrument is automaticallyput into configuration level.4-8 User Handbook. Part No HA026179 Issue 2.0 Oct-99