Download - Eurotherm Ltda

Quick Tour 2iTools4.2. CLONINGThe cloning feature allows the configuration and parameter settings of one instrument to becopied into another. This allows new instruments to be rapidly set up using a knownreference source or standard instrument. Every parameter and parameter value is downloadedto the new instrument which means that if the new instrument is used as a replacement it willcontain exactly the same information as the original. Cloning is generally only possible if thefollowing applies:• The target instrument has the same hardware configuration as the source instrument• The target instrument firmware (ie. Software built into the instrument) is the same or alater version than that of the source instrument. The instrument firmware version isdisplayed on the instrument when power is applied.• Generally, cloning will copy all operational, engineering and configuration parametersthat are writable. The communications address is not copied.WARNING !Every effort has been made to ensure that the information contained within the clonefiles is a replica of that configured in the instrument. It is the users responsibility toensure that the information cloned from one instrument to another is correct for theprocess to be controlled, and that all parameters are correctly replicated into the targetinstrument.4-6 User Handbook. Part No HA026179 Issue 2.0 Oct-99