XDT Manual - Pioneer Air Systems Engineering

Appendix O: Return Authorization Number Request FormXentaur Return Authorization Number Request Form• Xentaur must approve and assign a Return Authorization Number (RAN) to any instrument beingreturned.• The RAN must appear on all paperwork and packaging.• The issuance of a RAN does not automatically imply that the instrument is covered by our warranty.• In order to serve you better and protect our employees from any potentially hazardous contaminantsXentaur must return unopened at the senders expense all items that do not have a RAN.To obtain a RAN fill out this form and fax to (631) 345-5349.this document may be obtained in electronic format at www.xentaur.com and e-mailed backCustomerInformationCompany Name:Contact Name:Phone:Fax:Address:EquipmentInformationPart or Model Number:Original Purchase Date:Reason for Return:Serial Number:PO Number:Failure and hookup description if applicable:Process material(s) and/or environments (including radiation) to which the equipment hasbeen exposed. An RAN will not be issued without this information.UseInformationCertified by: Name:Signature:Title:Date:OSHA Hazard Communication Standard 29CFR 1910.1200 mandated that we take specific steps to protect our employees from exposure topotential hazards. Therefore, a letter certifying that the equipment has been decontaminated must accompany all equipment exposed tohazardous contamination.________________________________________________________________________Xentaur Corporation 84F Horseblock Road, Yaphank, NY, 11980 USA • tel: 631-345-3434 • fax: 631-345-5349