42XV560A 46XV560A 52XV560A - Blake Television & Video Rentals

Using the TV’s features (General)Sound adjustmentSetting the MTS (Multi-channel TV Sound)- analogue only -Auto modeThe MTS Auto mode automatically recognizes stereo/bilingual programmes depending on the broadcast signal.1 Press M, and then press or to display the SOUNDmenu.SOUNDMTSDualBassTrebleBalanceWOWStable SoundDynamic Range Control2 Press or to select MTS, and then press or toselect Auto or Mono.Mono modeIf you experience noise or poor reception of any stereo/bilingual programme, set the MTS mode to Mono.Noise will be reduced and reception may improve.Note:If you experience noise with a particular programme whosechannel reception is usually good, try setting MTS mode toAuto, and then switch S to e Mono (monaural).Selecting Dual 1 or Dual 2 modeYou can hear only Dual 1 or Dual 2 sound, when bilingualprogrammes are received.1 Press M, and then press or to display the SOUNDmenu.SOUNDMTSDualBassTrebleBalanceWOWStable SoundDynamic Range Control2 Press or to select Dual, and then press or toselect Dual 1 or Dual 2.Notes:• When the MTS setting is in Mono mode, the Dual menu isnot selectable.• The Dual menu setting status remains even if the TV isturned off.000000AutoDual 1OffAutoDual 1OffStereo and Bilingual transmissionsFor ATV programmesIf stereo or dual language broadcasts are transmitted, the wordStereo or Dual will appear on the screen each time positionsare changed, disappearing after a few seconds. If the broadcastis not in stereo, the word Mono will appear.Stereo… Press S to select Stereo or Mono.Bilingual… Bilingual transmissions are rare. If they aretransmitted, the word Dual will display. Choose the desiredchannel number, and if the word Dual appears, press S toselect Dual 1, Dual 2, Mono (NICAM) or Dual 1 or Dual 2(German stereo/bilingual broadcast).For DTV programmesFor stereo or dual mono broadcasts, press S and use or to select settings.Mode Displayd Stereoj Dual monoe Mono —Surround —Pressing Stereo S Left S RightDual 1 S Dual 2 S DualAdjusting the sound quality1 From the SOUND menu, press or to select the itemyou want to adjust.2 Press or to adjust the settings as desired.Selection Pressing Bass weaker strongerTreble weaker strongerBalance decreases the rightchanneldecreases the leftchannelUsing SRS WOW ® surround soundSRS WOW ® is a special combination of SRS Labs audiotechnologies that creates a thrilling surround sound experiencewith deep, rich bass from stereo sound sources. Your TV’saudio will sound fuller, richer and wider.SRS WOW ® consists of three features; SRS ® 3D, SRSFOCUS , and SRS TruBass ® .1 From the SOUND menu, press or to select WOW,and then press Q.2 Press or to select an item you want to adjust, andthen press or to adjust the settings as required.WOWSRS 3DFOCUSTruBassSRS 3D: To turn the surround effect On or Off.FOCUS: To turn the vocal emphasis effect On or Off.TruBass: To select the desired bass expansion level(Off, Low or High).OffOnHigh21