42XV560A 46XV560A 52XV560A - Blake Television & Video Rentals

Connecting your TVSelecting the PC/HDMI1 audio modeYou can select PC audio or HDMI1 audio when using thisfunction.1 Press M, and then press or to display the SETUPmenu.2 Press or to select AV Connection, and then pressQ to display the AV Connection menu.AV ConnectionPC/HDMI1 AudioHDMI1 AudioHDMI SettingsDigital Output3 Press or to select PC/HDMI1 Audio, and thenpress or to select PC or HDMI1.Setting the HDMI1 audio modeYou can select from three sound modes for an HDMI or DVIdevice connected to the HDMI1 input terminals: Auto,Digital or Analogue.Note:This function is available only when the PC/HDMI1 Audio modeis set to HDMI1.1 From the AV Connection menu, press or to selectHDMI1 Audio.AV ConnectionPC/HDMI1 AudioHDMI1 AudioHDMI SettingsDigital OutputPCDigitalAutoHDMI1AutoAutoDeep Colour modeThis function increases the available colours from the HDMIsource to increase the boundaries defined by the RGB orYCbCr colour space.x.v.ColourThis function expands the acceptable colour range (limits) ofHDMI signals and allows sending of wider colour signals fromHDMI sources.Lip Sync modeThis option activates an auto audio/video display timingadjustment function that allows HDMI source devices toaccurately perform synchronization automatically.All of the above HDMI settings require a proper HDMI sourcedevice.If HDMI source products do not support these functions, theTV may not work properly when activating these functions.Notes:• In a non-HDMI signal mode, this function is not available.• If your HDMI connection is capable of 1080p and/or your TVis capable of refresh rates greater than 60Hz or supportsDeep Colour, you will need a Category2 cable. ConventionalHDMI/DVI cables may not work properly with this mode.2 Press or to select Auto, Digital or Analogue.Selecting the HDMI settingsThe HDMI Settings menu consists of the following 3 items:Deep Colour, x.v.Colour and Lip Sync. Some earlyHDMI equipment may not work properly with your HDMITV. If you experience trouble, unplug your HDMI cable firstand then try setting these three options to Off. This shouldallow your early HDMI source to operate properly with yourTV.1 From the AV Connection menu, press or to selectHDMI Settings, and then press Q.HDMI SettingsDeep Colourx.v.ColourLip SyncOnOnOn2 Press or to select each item, and then press or to select the desired setting.35