42XV560A 46XV560A 52XV560A - Blake Television & Video Rentals

Using the TV’s features (General)2 Press or to select On or Off.Note:When Panel Lock is On, a reminder will appear when thebuttons on the TV are pressed. If the standby button ispressed, the TV will switch off and can only be brought out ofstandby by using the remote control.Setting the Sleep TimerThe Sleep Timer is especially useful if you want the TV to turnitself off after a selected period of time.1 Press M, and then press or to display the TIMERSmenu.The timersTIMERSProgramme TimersSleep Timer 00:00Programme Timers - digital only -This feature will set the TV to go to a specific channel at acertain time. It can be used to view a particular programme, orby setting the mode to daily or weekly, can be used to view aseries of programmes.1 Press M, then press or to display the TIMERSmenu.TIMERSProgramme TimersSleep Timer 00:002 Press to select Programme Timers, and then pressQ.3 Press if necessary to select an open timer position, andthen press Q. The SET TIMER menu will now appearon screen.4 Press or to go through the list adding the details ofthe programme by using the number buttons and or to make selections.SET TIMER11:36 Fri, 1 AugChannelDateStart TimeEnd TimeRepeatFri, 1 Aug 200811:3512:35Once0-9 Enter Number OK Save Timer MENU Back5 When all the details have been entered, press Q to savethe timer.The Digital TV timer indicator (- page 8) will appearorange.When the programme timer activates, the indicator willchange from orange to red.Note:When a timed programme is about to start, an informationscreen will appear offering the option of watching or cancellingthe timer. The menus and other channels will not be availableduring the timed programme unless the programme timer iscancelled. Programme timers are not performed when the TVis turned off with the ! POWER switch on the right side panel.2 Press or to select Sleep Timer.3 Press the Number buttons (0-9) to enter the amount oftime until the TV turns off. Alternatively, press or toadjust the time in blocks of 10 minutes up to 12 hours and50 minutes.4 Press P to start the timer.Confirming Software VersionThis feature can be used to check the version of softwarecurrently installed.1 Press M, and then press or to display the SETUPmenu2 Press or until System Information is selected.SETUPATV Auto Manual Tuning TuningDTV ATV Manual TuningDTV Settings Manual TuningAV DTV Connection SettingsPicture AV Connection PositionQuick Picture Setup PositionSystem Quick Setup InformationReset System TVInformation3 Press Q to display the Software Version.System InformationSoftware VersionXV550A1.2.69.0Aug 20 2008 - 14:55:08FW: 08Note:The Software Version displayed is just for the illustration.23