42XV560A 46XV560A 52XV560A - Blake Television & Video Rentals

More documents

Recommendations

Info

Connecting your TVConnecting a computerSignal names for mini D-sub 15 pin connectorPin assignment for RGB/PC terminalTo connect a PC to the RGB/PC terminal on the TV:An analogue RGB (15 pin) computer cable can be connected.Computer5110 615 11TV back view Pin No. Signal name Pin No. Signal name1 R 9 NC2 G 10 Ground3 B 11 NC4 NC (not 12 NCconnected)Mini D-sub 15 pin5 NC 13 H-sync6 Ground 14 V-sync7 Ground 15 NC8 GroundTo connect a PC to the HDMI terminal on the TV:When connecting a PC to the HDMI terminal on the TV, useRGB PC cablean HDMI-to DVI adapter cable and analogue audio cables.If connecting a PC with an HDMI terminal, use an HDMI cableConversion adapter(if necessary)(type A connector). Separate analogue cables are notnecessary.Audio cable for PC-to-TV connectionConnect a PC cable from the computer to the o RGB/PCterminal on the back of the TV.The following signals can be displayed:VGA: VESA 640 5 480 @ 60/72/75 HzS-VGA: VESA 800 5 600 @ 60/72/75 HzXGA: VESA 1024 5 768 @ 60/70/75 HzW-XGA: VESA 1280 5 768 @ 60/75 HzW-XGA: VESA 1360 5 768 @ 60 HzS-XGA: VESA 1280 5 1024 @ 60 HzNotes:• Some PC models cannot be connected to this TV.• There is no need to use an adapter for a computer with aDOS/V compatible mini D-sub 15 pin terminal.• A bar may appear in the upper, lower, right or left side of thescreen, or parts of the picture may be obscured dependingon some signals. This is not a malfunction.• If the edges of the picture are stretched, readjust the pictureposition adjustments in the PC Settings menu.• Depending on the specification of the PC you are using theDVD-<strong>Video</strong> playing and the DVD’s title, some scenes maybe skipped, or you may not be able to pause during multianglescenes.• The PC signal may not be detected correctly for certain PCmodels.TV back viewComputerTV back viewAudio cablefor PC-to-TVconnectionFor acceptable PC signal formats, see page 34.Notes:• The edges of images may be hidden.• The PC signal may not be detected correctly for certain PCmodels.36
Connecting your TVUsing the PC Settings• First, press o to display the video input mode list, and thenpress or and Q in order to select the PC input mode(- page 24).• The PC Setting function may not be available for somesignals and when no signal is received.• In certain cases, it may be difficult to optimally set the clockphase and sampling clock values depending on the inputsignal type.Notes:• In PC input mode, you cannot select Active BacklightControl, Auto Contrast, x.v.Colour Selection, 3D ColourManagement, Base Colour Adjustment, MPEG NR andDNR in the PICTURE menu and Colour, Tint, Sharpness,Black/White Level, Cinema Mode and Film Stabilizationin the Picture Settings menu (- page 19).• In PC input mode, Manual Settings (- page 24) is notdisplayed.Adjusting the picture size/position1 Press M, and then press or to display the SETUPmenu.2 Press or to select PC Settings.Adjusting the sampling clockIf the sampling clock does not match with the dot clockfrequency of the PC, blurred picture detail will occur, screenwidth will change, or drift patterns in vertical lines may beapparent.This function enables you to adjust and optimize the picture.1 From the PC Settings menu, press or to selectSampling Clock.2 Press or to optimize the picture.Sampling Clock 0Resetting the PC SettingsThe Reset function adjusts the PC Settings to the factorysettings.1 From the PC Settings menu, press or to selectReset.2 Press Q.Note:When a PC is connected using HDMI, none of these functionswill be available.SETUPMenu LanguageAuto TuningATV Manual TuningDTV Manual TuningDTV SettingsAV ConnectionPC SettingsQuick SetupEnglish3 Press Q to display the PC Settings menu.PC SettingsHorizontal PositionVertical PositionClock PhaseSampling ClockReset4 Press or to select an option you want to adjust. Press or to adjust the settings as required.Horizontal Position 00000Adjusting the clock phase of the pictureIf the clock phase, which synchronizes the PC signal and LCDdisplay, is not optimized, the picture will blur.This function enables you to adjust clock phase and display aclear picture.1 From the PC Settings menu, press or to selectClock Phase.2 Press or to obtain a clear picture.Clock Phase 037
Page 1 and 2: OWNER'S MANUALIntegrated Digital LC
Page 3 and 4: IntroductionWelcome to Toshiba• T
Page 5 and 6: Introduction5) When the TV will not
Page 7 and 8: Getting startedConnecting an aerial
Page 9 and 10: Getting startedTV back panel connec
Page 11 and 12: Getting startedLocation of controls
Page 13 and 14: Getting startedPICTUREmenuPICTUREPi
Page 15 and 16: Getting startedDTV Manual Tuning -
Page 17 and 18: Using the TV’s features (General)
Page 29 and 30: Other Digital TV features and setti
Page 31 and 32: Other Digital TV features and setti
Page 33 and 34: Connecting your TVConnecting an amp
Page 35: Connecting your TVSelecting the PC/
Page 39 and 40: Reference sectionTroubleshootingBef
Page 41 and 42: Reference sectionSpecificationsInte
Page 43 and 44: License Information on the software
Page 45 and 46: 2. You may modify your copy or copi
Page 47 and 48: How to Apply These Terms to Your Ne
Page 49 and 50: Although the Lesser General Public
Page 51 and 52: ) Give prominent notice with the co
Page 53 and 54: Exhibit DThis software is based in

42XV560A 46XV560A 52XV560A - Blake Television & Video Rentals

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?