Paroscientific, Inc.

Paroscientific, Inc. Document No. 8360-002 Rev. K. 8/1/200212 ADDENDUM:MET3A units that are delivered with the barometer port dismounted from the main body shouldbe assembled in the following manner:Apply at least three wraps of Teflon pipe tape (supplied with unit) to the ¾” malepipe thread on the top of the main body of the instrument. Ensure that the entirethread is adequately covered with the tape. Carefully mate the female thread at the base of the barometer port with thetaped male thread and screw the two together HAND TIGHT. Do not overtightenthese threads. Over-tightening could cause damage to the threads andimpede future dis-assembly.MET3A Installation, Operation & Maintenance Guide Page 29