Paroscientific, Inc.

Paroscientific, Inc. Document No. 8360-002 Rev. K. 8/1/20023 Bench Verification Test3.1 Required Test And Installation ComponentsYou will need the following items to complete your bench test and field installation.1. MET3A Meteorological Measurement System (P/N 1539-00X)Specification Drawing No. 7556-0042. MET3A Interface Cable (P/N 2319-XXX)3. Digiquartz CD Library (P/N 6732-201 Ver: 2.1)*4. Power Breakout / Supply Kit*®(P/N 1291-001) - 9 to 12 VDC from 110 VAC or(P/N 1291-002) - 9 to 12 VDC from 220 VAC5. GPS Receiver Interface Adapter Cable (consult factory)*6. PC with Windows 3.X or above.*7. 7/16” wrench (for bracket installation)* These items may be optional for your field installation. To verify the operationof the device with a PC you will require an external power source and breakoutas the PC serial port does not supply power to the MET3A. ParoscientificPower Supply Kit, part number 1291-001 or 1291-002, will simplify this process.3.2 Digiquartz Software®3.2.1 Digiquartz CD LibraryThe Digiquartz ® Library CD contains software and product literature.The Literature subdirectory contains the directories:®• Adobe Acrobat ®• Product Data SheetThe Acrobat subdirectory includes the Adobe Acrobat Reader installation files. Thisprogram is needed to view the Product Data Sheets. The Data Sheets subdirectory®contains the product literature files in Adobe PDF format. You will need an installedversion of the Adobe Acrobat Reader to view/print these files. You can access thesefiles from the menu program, which starts automatically under Windows 95/98. Youmust start these files from the file manager program for Windows 3.X.The Software subdirectory contains:• Digiquartz ®Assistant (32-bit Windows Only)• Digiquartz ®Interactive (16/32-bit Windows)• Samples (16 & 32 bit Windows)Utilities directories. (MS-DOS based software)MET3A Installation, Operation & Maintenance Guide Page 4