11.07.2015 Views

Football with 4-Digit Clock - Scoreboards

Football with 4-Digit Clock - Scoreboards

Football with 4-Digit Clock - Scoreboards

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Electro-Mech Scoreboard CompanyMP <strong>Football</strong> Control Console CX_402[PLAY CLOCKS] - Allows the operator to edit the current display value and theprogrammable reset values associated <strong>with</strong> Play <strong>Clock</strong>s displays, also known asDelay of Game Timers. You must have these optional displays and the three-buttonhandheld controller that ships <strong>with</strong> them for this function to be of any use. As longas the Play <strong>Clock</strong>s are not running (actively counting down), pressing the buttonproduces this prompt:CURRENT TIMETo set the Play <strong>Clock</strong>s to show 12 Seconds, press [PLAY CLOCKS] [1] [2][ENTER]. You can press [ENTER] at this prompt to skip to the next prompt <strong>with</strong>outmaking changes. If the Play <strong>Clock</strong> had been running when the operator pressed[PLAY CLOCKS], this would bypass the first prompt leading us to the second:RESET 1 TIMEThis is where you program the first (top) button of the three-button handheldcontroller. If you want that button to reset the Play <strong>Clock</strong> to 60 seconds every timeyou press it, type [6] [0] [ENTER] at this prompt. You can press [ENTER] to skip tothe next prompt <strong>with</strong>out making changes.RESET 2 TIMEThis is where you program the second (middle) button of the three-button handheldcontroller. If you want that button to reset the Play <strong>Clock</strong> to 5 seconds every timeyou press it, type [5] [ENTER] at this prompt. You can press [ENTER] to accept thecurrent value <strong>with</strong>out making changes.[AUTO HORN] - Allows the operator to set the behavior of the Horn. By default, theMain Horn attached to the scoreboard is activated for about four seconds at the endof each Segment. That is, when the <strong>Clock</strong> counts down to 0:00, the Horn blows.You can turn off this feature by using the [AUTO HORN] button. Pressing it bringsup this prompt:END OF SEG HORN1=AUTO 0=OFF To turn off the Automatic Horn at the End of each Segment, press [0] [ENTER] atthis prompt. You can press [ENTER] to skip to the next prompt <strong>with</strong>out makingchanges. The next prompt offers you control of the Horn at the end of a Time Out.END OF TIME OUT1=AUTO 0=OFF By default the Automatic Horn at the End of Time Out is disabled, but you canenable it by pressing [1] [ENTER] here.Revised 2011-September-22 Page 24

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!