IronPort - CLI reference guide

More documents

Recommendations

Info

Example dnslistconfig Description Usage 76 Table 3-28 dnsflush mail3.example.com> dnsflush Are you sure you want to clear out the DNS cache? [N]> Y Configure DNS List services support Commit: This command requires a ‘commit’. Cluster Management: This command is restricted to machine mode. Batch Command: This command does not support a batch format Cisco IronPort AsyncOS 7.6 CLI Reference Guide Chapter
Chapter Example Table 3-29 dnslistconfig mail3.example.com> dnslistconfig Current DNS List Settings: Negative Response TTL: 1800 seconds DNS List Query Timeout: 3 seconds Choose the operation you want to perform: - SETUP - Configure general settings. []> setup Enter the cache TTL for negative responses in seconds: [1800]> 1200 Enter the query timeout in seconds: [3]> Settings updated. Current DNS List Settings: Negative Response TTL: 1200 seconds Cisco IronPort AsyncOS 7.6 CLI Reference Guide 77
Page 1 and 2:
Cisco IronPort AsyncOS 7.6 CLI Refe
Page 3 and 4:
Preface xi Before you Read this Boo
Page 5 and 6:
dnslistflush 3-78 dnslisttest 3-79
Page 7 and 8:
Cisco IronPort AsyncOS 7.6 CLI Refe
Page 9 and 10:
who 3-558 whoami 3-559 Cisco IronPo
Page 11 and 12:
Preface The Cisco IronPort AsyncOS
Page 13 and 14:
Chapter 3, “The Commands: Referen
Page 15 and 16:
https://supportforums.cisco.com Cis
Page 17 and 18:
Third Party Contributors Some softw
Page 19 and 20:
CHAPTER Cisco IronPort AsyncOS 7.6
Page 21 and 22:
Chapter Table 1-1 CLI Commands (No
Page 23 and 24:
Chapter The commands in Table 1-2 r
Page 25 and 26:
Chapter Table 1-2 CLI Commands (com
Page 27 and 28:
DRAFT - 78449 BUG FIX ONLY - CISCO
Page 29 and 30:
Chapter DRAFT - 78449 BUG FIX ONLY
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
CHAPTER Cisco IronPort AsyncOS 7.6
Page 43 and 44:
Chapter Usage Example Commit: This
Page 45 and 46:
Chapter antispamstatus Description
Page 47 and 48:
Chapter Description Usage Example i
Page 49 and 50:
Chapter Example: Enabling Incoming
Page 51 and 52:
Chapter Table 3-4 incomingrelayconf
Page 53 and 54:
Chapter Table 3-4 incomingrelayconf
Page 55 and 56:
Chapter Anti-Virus antivirusconfig
Page 57 and 58:
Chapter Table 3-5 antivirusconfig (
Page 59 and 60:
Chapter antivirusstatus Description
Page 61 and 62:
Chapter Example Command Line Manage
Page 63 and 64:
Chapter Example clearchanges or cle
Page 65 and 66: Chapter Example quit or q or exit D
Page 67 and 68: Chapter Example Cluster Management:
Page 69 and 70: Chapter mailconfig Description Usag
Page 71 and 72: Chapter Usage If mail delivery was
Page 73 and 74: Chapter Usage Example showconfig De
Page 75 and 76: Chapter clusterconfig Description T
Page 77 and 78: Chapter Usage Example clustercheck
Page 79 and 80: Chapter Table 3-20 domainkeysconfig
Page 81 and 82: Chapter Table 3-20 domainkeysconfig
Page 83 and 84: Chapter Batch Format - Verification
Page 85 and 86: Chapter Batch Format - Signing Keys
Page 87 and 88: Chapter Batch Format - Search for a
Page 89 and 90: Chapter 1. Generate a private key 2
Page 91 and 92: Chapter Choose the operation you wa
Page 93 and 94: Chapter The private key which is to
Page 95 and 96: Chapter This value becomes the "l"
Page 97 and 98: Chapter Choose the operation you wa
Page 99 and 100: Chapter There are currently 1 domai
Page 101 and 102: Chapter There are currently 1 domai
Page 103 and 104: Chapter dig Description Usage Batch
Page 105 and 106: Chapter ;; ANSWER SECTION: mexample
Page 107 and 108: Chapter Note Cannot be used when us
Page 109 and 110: Chapter Alternate authoritative DNS
Page 111 and 112: Chapter Adding an Alternate DNS Ser
Page 113 and 114: Chapter Table 3-27 dnsconfig - Usin
Page 115: Chapter dnsflush Description Usage
Page 119 and 120: Chapter Example dnslisttest Descrip
Page 121 and 122: Chapter Example Table 3-32 dnsstatu
Page 123 and 124: Chapter addressconfig Description U
Page 125 and 126: Chapter adminaccessconfig Descripti
Page 127 and 128: Chapter Deleting all existing IP ad
Page 129 and 130: Chapter Table 3-34 adminaccessconfi
Page 141 and 142: Chapter Usage Example - Pasting in
Page 143 and 144: Chapter Table 3-36 certconfig - Pas
Page 145 and 146: Chapter Table 3-36 certconfig - Pas
Page 147 and 148: Chapter Table 3-37 certconfig - Cre
Page 149 and 150: Chapter diagnostic Description Tabl
Page 151 and 152: Chapter Clear the LDAP, DNS and ARP
Page 153 and 154: Chapter Example: Verify Connectivit
Page 155 and 156: Chapter encryptionconfig Usage Exam
Page 157 and 158: Chapter Table 3-41 encryptionconfig
Page 163 and 164: Chapter Example encryptionupdate De
Page 165 and 166: Chapter featurekeyconfig Descriptio
Page 167 and 168:
Chapter ntpconfig Description Usage
Page 169 and 170:
Chapter Table 3-46 ntpconfig (Conti
Page 171 and 172:
Chapter Example resume Description
Page 173 and 174:
Chapter Example resumelistener Desc
Page 175 and 176:
Chapter Example settz Description B
Page 177 and 178:
Chapter Example Table 3-52 settz ma
Page 179 and 180:
Chapter shutdown Description Usage
Page 181 and 182:
Chapter Example In the following ex
Page 183 and 184:
Chapter status Description Usage Ta
Page 185 and 186:
Chapter Table 3-56 status (Continue
Page 187 and 188:
Chapter Table 3-57 supportrequest i
Page 189 and 190:
Chapter Example suspenddel Descript
Page 191 and 192:
Chapter Example techsupport Descrip
Page 193 and 194:
Chapter Example Table 3-61 techsupp
Page 195 and 196:
Chapter Example Table 3-62 tlsverif
Page 197 and 198:
Chapter Example Table 3-63 trace ma
Page 199 and 200:
Chapter Table 3-63 trace (Continued
Page 201 and 202:
Chapter Table 3-63 trace (Continued
Page 203 and 204:
Chapter Batch Format Example update
Page 205 and 206:
Chapter Table 3-64 updateconfig McA
Page 207 and 208:
Chapter Table 3-64 updateconfig Ser
Page 209 and 210:
Chapter Example version Description
Page 211 and 212:
Chapter Usage LDAP Commit: This com
Page 213 and 214:
Chapter recipients in the mail re-r
Page 215 and 216:
Chapter Table 3-67 ldapconfig - New
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Chapter Table 3-68 ldapconfig - Con
Page 227 and 228:
Page 229 and 230:
Chapter sievechar Description Usage
Page 231 and 232:
Chapter addresslistconfig Descripti
Page 233 and 234:
Chapter Example mail3.example.com>
Page 235 and 236:
Chapter Note Using the ‘aliasconf
Page 237 and 238:
Chapter Table 3-71 aliasconfig (Con
Page 239 and 240:
Chapter Table 3-71 aliasconfig (Con
Page 241 and 242:
Chapter archivemessage Description
Page 243 and 244:
Chapter Mail from the groupware ser
Page 245 and 246:
Chapter Table 3-74 altsrchost (Cont
Page 247 and 248:
Chapter Example Cluster Management:
Page 249 and 250:
Chapter Table 3-75 bounceconfig- Cr
Page 251 and 252:
Chapter Table 3-76 bounceconfig- Ed
Page 253 and 254:
Chapter In this example, the Outbou
Page 255 and 256:
Chapter Table 3-77 listenerconfig a
Page 257 and 258:
Chapter bouncerecipients Descriptio
Page 259 and 260:
Chapter Table 3-79 boundcerecipient
Page 261 and 262:
Page 263 and 264:
Chapter Table 3-81 bvconfig - SETUP
Page 265 and 266:
Chapter Example The IronPort applia
Page 267 and 268:
Chapter Table 3-83 deleterecipients
Page 269 and 270:
Chapter Example In the following ex
Page 271 and 272:
Chapter destconfig []>foo.com Using
Page 273 and 274:
Chapter Creating a new destination
Page 275 and 276:
Chapter than 100 connections or del
Page 277 and 278:
Chapter Table 3-89 destconfig examp
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Chapter hostrate Description Usage
Page 291 and 292:
Chapter Usage Commit: This command
Page 293 and 294:
Chapter Table 3-94 hoststatus (Cont
Page 295 and 296:
Chapter oldmessage Description Usag
Page 297 and 298:
Chapter Example redirectrecipients
Page 299 and 300:
Chapter resetcounters Description U
Page 301 and 302:
Chapter Example showmessage Descrip
Page 303 and 304:
Chapter Usage Batch Format Example
Page 305 and 306:
Chapter status [0] [0] 1820@example
Page 307 and 308:
Chapter Example Table 3-100 status
Page 309 and 310:
Chapter tophosts Description Usage
Page 311 and 312:
Chapter topin Description Usage Dis
Page 313 and 314:
Chapter unsubscribe Description Usa
Page 315 and 316:
Chapter Table 3-103 unsubscribe (Co
Page 317 and 318:
Page 319 and 320:
Chapter emconfig Description Usage
Page 321 and 322:
Chapter Example of Connecting to RS
Page 323 and 324:
Chapter etherconfig Description Usa
Page 325 and 326:
Chapter Table 3-107 etherconfig (Co
Page 327 and 328:
Chapter Enabling NIC Pairing via th
Page 329 and 330:
Chapter Table 3-109 etherconfig - I
Page 331 and 332:
Chapter Table 3-109 etherconfig - I
Page 333 and 334:
Chapter Table 3-110 etherconfig - C
Page 335 and 336:
Chapter interfaceconfig Description
Page 337 and 338:
Chapter Example: Configuring an Int
Page 339 and 340:
Chapter Table 3-112 interfaceconfig
Page 341 and 342:
Chapter Example: Changing the IronP
Page 343 and 344:
Chapter Table 3-113 Changing the Ir
Page 345 and 346:
Chapter netstat Description Usage U
Page 347 and 348:
Chapter ping Description Usage Tabl
Page 349 and 350:
Chapter routeconfig Description Tab
Page 351 and 352:
Chapter Table 3-117 routeconfig Arg
Page 353 and 354:
Chapter []> 192.168.12.0/24 Please
Page 355 and 356:
Chapter setgateway Description Usag
Page 357 and 358:
Page 359 and 360:
Chapter Example Print a listing of
Page 361 and 362:
Chapter Use smtproutes -> EDIT to m
Page 363 and 364:
Chapter 4. SSL v2 and v3 5. SSL v3
Page 365 and 366:
Chapter telnet Description Usage -
Page 367 and 368:
Chapter Description Usage Use the t
Page 369 and 370:
Chapter outbreakconfig Description
Page 371 and 372:
Chapter outbreakflush Description U
Page 373 and 374:
Chapter Example Table 3-126 outbrea
Page 375 and 376:
Chapter Policy Enforcement dictiona
Page 377 and 378:
Chapter Table 3-128 dictionaryconfi
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Chapter exceptionconfig Description
Page 389 and 390:
Chapter Table 3-132 exceptionconfig
Page 391 and 392:
Chapter Table 3-133 filters (Contin
Page 393 and 394:
Chapter Table 3-133 filters (Contin
Page 395 and 396:
Chapter Unwanted marketing messages
Page 397 and 398:
Chapter Table 3-134 policyconfig -
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Chapter Table 3-139 policyconfig 0
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Chapter Table 3-140illustrates how
Page 453 and 454:
Chapter Table 3-140 DLP Policies fo
Page 455 and 456:
Chapter quarantineconfig Descriptio
Page 457 and 458:
Chapter Table 3-141 quarantineconfi
Page 459 and 460:
Chapter Users and Quarantines Table
Page 461 and 462:
Chapter messages that do not match
Page 463 and 464:
Chapter Table 3-142 Scan Config - C
Page 465 and 466:
Chapter Usage Commit: This command
Page 467 and 468:
Chapter textconfig Description Usag
Page 469 and 470:
Chapter Table 3-144 textconfig - Cr
Page 471 and 472:
Chapter Table 3-144 textconfig - Cr
Page 473 and 474:
Chapter Table 3-145 textconfig - Im
Page 475 and 476:
Chapter Table 3-146 textconfig - Ex
Page 477 and 478:
Chapter alertconfig Description Usa
Page 479 and 480:
Chapter Table 3-147 alertconfig - C
Page 481 and 482:
Page 483 and 484:
Page 485 and 486:
Chapter Example of grep Use the fol
Page 487 and 488:
Chapter Example of FTP Push Log Sub
Page 489 and 490:
Chapter Table 3-150 logconfig - Con
Page 491 and 492:
Chapter Table 3-150 logconfig - Con
Page 493 and 494:
Chapter Table 3-151 logconfig - Cre
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
Chapter Batch Command: This command
Page 507 and 508:
Chapter snmpconfig Description Usag
Page 509 and 510:
Chapter Table 3-154 snmpconfig (Con
Page 511 and 512:
Chapter Table 3-154 snmpconfig (Con
Page 513 and 514:
Chapter Example Table 3-155 tail ma
Page 515 and 516:
Chapter Reporting reportingconfig T
Page 517 and 518:
Chapter Example: Enabling Reporting
Page 519 and 520:
Chapter Enabling HAT REJECT Informa
Page 521 and 522:
Chapter Enabling Timeout Alerts (M-
Page 523 and 524:
Chapter Enabling Centralized Report
Page 525 and 526:
Chapter Table 3-161 reportingconfig
Page 527 and 528:
Page 529 and 530:
Chapter Example Table 3-164 senderb
Page 531 and 532:
Chapter Usage Table 3-165 listenerc
Page 533 and 534:
Chapter Print a sendergroup listing
Page 535 and 536:
Chapter Table 3-166 listenerconfig
Page 537 and 538:
Chapter Batch Format - RAT Table 3-
Page 539 and 540:
Chapter Example - Adding a listener
Page 541 and 542:
Page 543 and 544:
Chapter Example - Customizing the H
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Chapter Step 2 Outside of the Comma
Page 553 and 554:
Chapter Table 3-170 listnerconfig -
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
Page 561 and 562:
Page 563 and 564:
Chapter Example - Configuring SPF a
Page 565 and 566:
Chapter The following SPF control s
Page 567 and 568:
Chapter Table 3-173 SPF/SIDF Settin
Page 569 and 570:
Chapter localeconfig Description Us
Page 571 and 572:
Chapter Example Table 3-175 localec
Page 573 and 574:
Chapter Example Batch Command: This
Page 575 and 576:
Chapter Table 3-176 smtpauthconfig
Page 577 and 578:
Chapter Example Table 3-177 systems
Page 579 and 580:
Chapter Table 3-177 systemsetup Wou
Page 581 and 582:
Chapter Table 3-177 systemsetup Ent
Page 583 and 584:
Chapter Table 3-177 systemsetup Max
Page 585 and 586:
Chapter Table 3-177 systemsetup Ent
Page 587 and 588:
Chapter Table 3-177 systemsetup []>
Page 589 and 590:
Chapter User Management userconfig
Page 591 and 592:
Chapter Table 3-178 userconfig - Cr
Page 593 and 594:
Chapter Table 3-179 userconfig - Se
Page 595 and 596:
Chapter Table 3-179 userconfig - Se
Page 597 and 598:
Chapter Example last Description Us
Page 599 and 600:
Chapter Usage Example whoami Descri
show all

IronPort - CLI reference guide

Create successful ePaper yourself

Delete template?

Save as template?