IronPort - CLI reference guide

More documents

Recommendations

Info

Example resetconfig Description 30 Table 3-16 mailconfig mail3.example.com> mailconfig Please enter the email address to which you want to send the configuration file. Separate multiple addresses with commas. []> user@example.com The configuration file has been sent to user@example.com. mail3.example.com> Cisco IronPort AsyncOS 7.6 CLI Reference Guide Chapter Send the configuration to a mailbox to which you have access to confirm that the system is able to send email on your network. When physically transferring the appliance, you may want to start with factory defaults. The resetconfig command resets all IronPort AsyncOS configuration values to factory defaults. This command is extremely destructive, and it should only be used when you are transferring the unit or as a last resort to solving configuration issues. It is recommended you run the systemsetup command after reconnecting to the CLI after you have run the resetconfig command. Note The resetconfig command only works when the appliance is in the offline state. When the resetconfig command completes, the appliance is automatically returned to the online state, even before you run the systemsetup command again.
Chapter Usage If mail delivery was suspended before you issued the resetconfig command, the mail will attempt to be delivered again when the resetconfig command completes. Warning The resetconfig command will return all network settings to factory defaults, potentially disconnecting you from the CLI, disabling services that you used to connect to the appliance (FTP, Telnet, SSH, HTTP, HTTPS), and even removing additional user accounts you created with the userconfig command. Do not use this command if you are not able to reconnect to the CLI using the Serial interface or the default settings on the Management port through the default Admin user account. Commit: This command does not require a ‘commit’. Cluster Management: This command is restricted to machine mode. It is further restricted to the login host (i.e., the specific machine you are logged onto). This command requires access to the local file system. Batch Command: This command does not support a batch format. Cisco IronPort AsyncOS 7.6 CLI Reference Guide 31
Page 1 and 2:
Cisco IronPort AsyncOS 7.6 CLI Refe
Page 3 and 4:
Preface xi Before you Read this Boo
Page 5 and 6:
dnslistflush 3-78 dnslisttest 3-79
Page 7 and 8:
Cisco IronPort AsyncOS 7.6 CLI Refe
Page 9 and 10:
who 3-558 whoami 3-559 Cisco IronPo
Page 11 and 12:
Preface The Cisco IronPort AsyncOS
Page 13 and 14:
Chapter 3, “The Commands: Referen
Page 15 and 16:
https://supportforums.cisco.com Cis
Page 17 and 18:
Third Party Contributors Some softw
Page 19 and 20: CHAPTER Cisco IronPort AsyncOS 7.6
Page 21 and 22: Chapter Table 1-1 CLI Commands (No
Page 23 and 24: Chapter The commands in Table 1-2 r
Page 25 and 26: Chapter Table 1-2 CLI Commands (com
Page 27 and 28: DRAFT - 78449 BUG FIX ONLY - CISCO
Page 29 and 30: Chapter DRAFT - 78449 BUG FIX ONLY
Page 41 and 42: CHAPTER Cisco IronPort AsyncOS 7.6
Page 43 and 44: Chapter Usage Example Commit: This
Page 45 and 46: Chapter antispamstatus Description
Page 47 and 48: Chapter Description Usage Example i
Page 49 and 50: Chapter Example: Enabling Incoming
Page 51 and 52: Chapter Table 3-4 incomingrelayconf
Page 53 and 54: Chapter Table 3-4 incomingrelayconf
Page 55 and 56: Chapter Anti-Virus antivirusconfig
Page 57 and 58: Chapter Table 3-5 antivirusconfig (
Page 59 and 60: Chapter antivirusstatus Description
Page 61 and 62: Chapter Example Command Line Manage
Page 63 and 64: Chapter Example clearchanges or cle
Page 65 and 66: Chapter Example quit or q or exit D
Page 67 and 68: Chapter Example Cluster Management:
Page 69: Chapter mailconfig Description Usag
Page 73 and 74: Chapter Usage Example showconfig De
Page 75 and 76: Chapter clusterconfig Description T
Page 77 and 78: Chapter Usage Example clustercheck
Page 79 and 80: Chapter Table 3-20 domainkeysconfig
Page 81 and 82: Chapter Table 3-20 domainkeysconfig
Page 83 and 84: Chapter Batch Format - Verification
Page 85 and 86: Chapter Batch Format - Signing Keys
Page 87 and 88: Chapter Batch Format - Search for a
Page 89 and 90: Chapter 1. Generate a private key 2
Page 91 and 92: Chapter Choose the operation you wa
Page 93 and 94: Chapter The private key which is to
Page 95 and 96: Chapter This value becomes the "l"
Page 97 and 98: Chapter Choose the operation you wa
Page 99 and 100: Chapter There are currently 1 domai
Page 101 and 102: Chapter There are currently 1 domai
Page 103 and 104: Chapter dig Description Usage Batch
Page 105 and 106: Chapter ;; ANSWER SECTION: mexample
Page 107 and 108: Chapter Note Cannot be used when us
Page 109 and 110: Chapter Alternate authoritative DNS
Page 111 and 112: Chapter Adding an Alternate DNS Ser
Page 113 and 114: Chapter Table 3-27 dnsconfig - Usin
Page 115 and 116: Chapter dnsflush Description Usage
Page 117 and 118: Chapter Example Table 3-29 dnslistc
Page 119 and 120: Chapter Example dnslisttest Descrip
Page 121 and 122:
Chapter Example Table 3-32 dnsstatu
Page 123 and 124:
Chapter addressconfig Description U
Page 125 and 126:
Chapter adminaccessconfig Descripti
Page 127 and 128:
Chapter Deleting all existing IP ad
Page 129 and 130:
Chapter Table 3-34 adminaccessconfi
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Chapter Usage Example - Pasting in
Page 143 and 144:
Chapter Table 3-36 certconfig - Pas
Page 145 and 146:
Chapter Table 3-36 certconfig - Pas
Page 147 and 148:
Chapter Table 3-37 certconfig - Cre
Page 149 and 150:
Chapter diagnostic Description Tabl
Page 151 and 152:
Chapter Clear the LDAP, DNS and ARP
Page 153 and 154:
Chapter Example: Verify Connectivit
Page 155 and 156:
Chapter encryptionconfig Usage Exam
Page 157 and 158:
Chapter Table 3-41 encryptionconfig
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Chapter Example encryptionupdate De
Page 165 and 166:
Chapter featurekeyconfig Descriptio
Page 167 and 168:
Chapter ntpconfig Description Usage
Page 169 and 170:
Chapter Table 3-46 ntpconfig (Conti
Page 171 and 172:
Chapter Example resume Description
Page 173 and 174:
Chapter Example resumelistener Desc
Page 175 and 176:
Chapter Example settz Description B
Page 177 and 178:
Chapter Example Table 3-52 settz ma
Page 179 and 180:
Chapter shutdown Description Usage
Page 181 and 182:
Chapter Example In the following ex
Page 183 and 184:
Chapter status Description Usage Ta
Page 185 and 186:
Chapter Table 3-56 status (Continue
Page 187 and 188:
Chapter Table 3-57 supportrequest i
Page 189 and 190:
Chapter Example suspenddel Descript
Page 191 and 192:
Chapter Example techsupport Descrip
Page 193 and 194:
Chapter Example Table 3-61 techsupp
Page 195 and 196:
Chapter Example Table 3-62 tlsverif
Page 197 and 198:
Chapter Example Table 3-63 trace ma
Page 199 and 200:
Chapter Table 3-63 trace (Continued
Page 201 and 202:
Chapter Table 3-63 trace (Continued
Page 203 and 204:
Chapter Batch Format Example update
Page 205 and 206:
Chapter Table 3-64 updateconfig McA
Page 207 and 208:
Chapter Table 3-64 updateconfig Ser
Page 209 and 210:
Chapter Example version Description
Page 211 and 212:
Chapter Usage LDAP Commit: This com
Page 213 and 214:
Chapter recipients in the mail re-r
Page 215 and 216:
Chapter Table 3-67 ldapconfig - New
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Chapter Table 3-68 ldapconfig - Con
Page 227 and 228:
Chapter Usage Example Commit: This
Page 229 and 230:
Chapter sievechar Description Usage
Page 231 and 232:
Chapter addresslistconfig Descripti
Page 233 and 234:
Chapter Example mail3.example.com>
Page 235 and 236:
Chapter Note Using the ‘aliasconf
Page 237 and 238:
Chapter Table 3-71 aliasconfig (Con
Page 239 and 240:
Chapter Table 3-71 aliasconfig (Con
Page 241 and 242:
Chapter archivemessage Description
Page 243 and 244:
Chapter Mail from the groupware ser
Page 245 and 246:
Chapter Table 3-74 altsrchost (Cont
Page 247 and 248:
Chapter Example Cluster Management:
Page 249 and 250:
Chapter Table 3-75 bounceconfig- Cr
Page 251 and 252:
Chapter Table 3-76 bounceconfig- Ed
Page 253 and 254:
Chapter In this example, the Outbou
Page 255 and 256:
Chapter Table 3-77 listenerconfig a
Page 257 and 258:
Chapter bouncerecipients Descriptio
Page 259 and 260:
Chapter Table 3-79 boundcerecipient
Page 261 and 262:
Page 263 and 264:
Chapter Table 3-81 bvconfig - SETUP
Page 265 and 266:
Chapter Example The IronPort applia
Page 267 and 268:
Chapter Table 3-83 deleterecipients
Page 269 and 270:
Chapter Example In the following ex
Page 271 and 272:
Chapter destconfig []>foo.com Using
Page 273 and 274:
Chapter Creating a new destination
Page 275 and 276:
Chapter than 100 connections or del
Page 277 and 278:
Chapter Table 3-89 destconfig examp
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Chapter hostrate Description Usage
Page 291 and 292:
Chapter Usage Commit: This command
Page 293 and 294:
Chapter Table 3-94 hoststatus (Cont
Page 295 and 296:
Chapter oldmessage Description Usag
Page 297 and 298:
Chapter Example redirectrecipients
Page 299 and 300:
Chapter resetcounters Description U
Page 301 and 302:
Chapter Example showmessage Descrip
Page 303 and 304:
Chapter Usage Batch Format Example
Page 305 and 306:
Chapter status [0] [0] 1820@example
Page 307 and 308:
Chapter Example Table 3-100 status
Page 309 and 310:
Chapter tophosts Description Usage
Page 311 and 312:
Chapter topin Description Usage Dis
Page 313 and 314:
Chapter unsubscribe Description Usa
Page 315 and 316:
Chapter Table 3-103 unsubscribe (Co
Page 317 and 318:
Page 319 and 320:
Chapter emconfig Description Usage
Page 321 and 322:
Chapter Example of Connecting to RS
Page 323 and 324:
Chapter etherconfig Description Usa
Page 325 and 326:
Chapter Table 3-107 etherconfig (Co
Page 327 and 328:
Chapter Enabling NIC Pairing via th
Page 329 and 330:
Chapter Table 3-109 etherconfig - I
Page 331 and 332:
Chapter Table 3-109 etherconfig - I
Page 333 and 334:
Chapter Table 3-110 etherconfig - C
Page 335 and 336:
Chapter interfaceconfig Description
Page 337 and 338:
Chapter Example: Configuring an Int
Page 339 and 340:
Chapter Table 3-112 interfaceconfig
Page 341 and 342:
Chapter Example: Changing the IronP
Page 343 and 344:
Chapter Table 3-113 Changing the Ir
Page 345 and 346:
Chapter netstat Description Usage U
Page 347 and 348:
Chapter ping Description Usage Tabl
Page 349 and 350:
Chapter routeconfig Description Tab
Page 351 and 352:
Chapter Table 3-117 routeconfig Arg
Page 353 and 354:
Chapter []> 192.168.12.0/24 Please
Page 355 and 356:
Chapter setgateway Description Usag
Page 357 and 358:
Page 359 and 360:
Chapter Example Print a listing of
Page 361 and 362:
Chapter Use smtproutes -> EDIT to m
Page 363 and 364:
Chapter 4. SSL v2 and v3 5. SSL v3
Page 365 and 366:
Chapter telnet Description Usage -
Page 367 and 368:
Chapter Description Usage Use the t
Page 369 and 370:
Chapter outbreakconfig Description
Page 371 and 372:
Chapter outbreakflush Description U
Page 373 and 374:
Chapter Example Table 3-126 outbrea
Page 375 and 376:
Chapter Policy Enforcement dictiona
Page 377 and 378:
Chapter Table 3-128 dictionaryconfi
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Chapter exceptionconfig Description
Page 389 and 390:
Chapter Table 3-132 exceptionconfig
Page 391 and 392:
Chapter Table 3-133 filters (Contin
Page 393 and 394:
Chapter Table 3-133 filters (Contin
Page 395 and 396:
Chapter Unwanted marketing messages
Page 397 and 398:
Chapter Table 3-134 policyconfig -
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Chapter Table 3-139 policyconfig 0
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Chapter Table 3-140illustrates how
Page 453 and 454:
Chapter Table 3-140 DLP Policies fo
Page 455 and 456:
Chapter quarantineconfig Descriptio
Page 457 and 458:
Chapter Table 3-141 quarantineconfi
Page 459 and 460:
Chapter Users and Quarantines Table
Page 461 and 462:
Chapter messages that do not match
Page 463 and 464:
Chapter Table 3-142 Scan Config - C
Page 465 and 466:
Chapter Usage Commit: This command
Page 467 and 468:
Chapter textconfig Description Usag
Page 469 and 470:
Chapter Table 3-144 textconfig - Cr
Page 471 and 472:
Chapter Table 3-144 textconfig - Cr
Page 473 and 474:
Chapter Table 3-145 textconfig - Im
Page 475 and 476:
Chapter Table 3-146 textconfig - Ex
Page 477 and 478:
Chapter alertconfig Description Usa
Page 479 and 480:
Chapter Table 3-147 alertconfig - C
Page 481 and 482:
Page 483 and 484:
Page 485 and 486:
Chapter Example of grep Use the fol
Page 487 and 488:
Chapter Example of FTP Push Log Sub
Page 489 and 490:
Chapter Table 3-150 logconfig - Con
Page 491 and 492:
Chapter Table 3-150 logconfig - Con
Page 493 and 494:
Chapter Table 3-151 logconfig - Cre
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
Chapter Batch Command: This command
Page 507 and 508:
Chapter snmpconfig Description Usag
Page 509 and 510:
Chapter Table 3-154 snmpconfig (Con
Page 511 and 512:
Chapter Table 3-154 snmpconfig (Con
Page 513 and 514:
Chapter Example Table 3-155 tail ma
Page 515 and 516:
Chapter Reporting reportingconfig T
Page 517 and 518:
Chapter Example: Enabling Reporting
Page 519 and 520:
Chapter Enabling HAT REJECT Informa
Page 521 and 522:
Chapter Enabling Timeout Alerts (M-
Page 523 and 524:
Chapter Enabling Centralized Report
Page 525 and 526:
Chapter Table 3-161 reportingconfig
Page 527 and 528:
Page 529 and 530:
Chapter Example Table 3-164 senderb
Page 531 and 532:
Chapter Usage Table 3-165 listenerc
Page 533 and 534:
Chapter Print a sendergroup listing
Page 535 and 536:
Chapter Table 3-166 listenerconfig
Page 537 and 538:
Chapter Batch Format - RAT Table 3-
Page 539 and 540:
Chapter Example - Adding a listener
Page 541 and 542:
Page 543 and 544:
Chapter Example - Customizing the H
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Chapter Step 2 Outside of the Comma
Page 553 and 554:
Chapter Table 3-170 listnerconfig -
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
Page 561 and 562:
Page 563 and 564:
Chapter Example - Configuring SPF a
Page 565 and 566:
Chapter The following SPF control s
Page 567 and 568:
Chapter Table 3-173 SPF/SIDF Settin
Page 569 and 570:
Chapter localeconfig Description Us
Page 571 and 572:
Chapter Example Table 3-175 localec
Page 573 and 574:
Chapter Example Batch Command: This
Page 575 and 576:
Chapter Table 3-176 smtpauthconfig
Page 577 and 578:
Chapter Example Table 3-177 systems
Page 579 and 580:
Chapter Table 3-177 systemsetup Wou
Page 581 and 582:
Chapter Table 3-177 systemsetup Ent
Page 583 and 584:
Chapter Table 3-177 systemsetup Max
Page 585 and 586:
Chapter Table 3-177 systemsetup Ent
Page 587 and 588:
Chapter Table 3-177 systemsetup []>
Page 589 and 590:
Chapter User Management userconfig
Page 591 and 592:
Chapter Table 3-178 userconfig - Cr
Page 593 and 594:
Chapter Table 3-179 userconfig - Se
Page 595 and 596:
Chapter Table 3-179 userconfig - Se
Page 597 and 598:
Chapter Example last Description Us
Page 599 and 600:
Chapter Usage Example whoami Descri
show all

IronPort - CLI reference guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?