IronPort - CLI reference guide

246
Table 3-91 destconfig example: Inbound “Shock Absorber”
Do you wish to apply a recipient limit to this domain? [N]> y
Enter the number of minutes used to measure the recipient limit.
[60]> 1
Enter the max number of recipients per 1 minutes for
"exchange.example.com".
[]> 1000
Select how you want to apply the limits for exchange.example.com:
1. One limit applies to the entire domain for exchange.example.com
2. Separate limit for each mail exchanger IP address
[1]> 1
Select how the limits will be enforced:
1. System Wide
2. Per Virtual Gateway(tm)
[1]> 1
Cisco IronPort AsyncOS 7.6 CLI Reference Guide
Chapter
Do you wish to apply a specific TLS setting for this domain? [N]> n