26.11.2012 Views

IronPort - CLI reference guide

IronPort - CLI reference guide

IronPort - CLI reference guide

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

10<br />

Table 3-4 incomingrelayconfig<br />

Incoming relays: Enabled<br />

Choose the operation you want to perform:<br />

- SETUP - Edit update configuration.<br />

- RELAYLIST - Configure incoming relays.<br />

[]> relaylist<br />

There are no relays defined.<br />

Choose the operation you want to perform:<br />

- NEW - Create a new entry<br />

[]> new<br />

Enter a name for this incoming relay (Ex: "first-hop")<br />

[]> first-hop<br />

Enter the IP address of the incoming relay. CIDR addresses such as<br />

Cisco <strong>IronPort</strong> AsyncOS 7.6 <strong>CLI</strong> Reference Guide<br />

Chapter<br />

10.1.1.0/24 are allowed. IP address ranges such as 10.1.1.10-20 are<br />

allowed.<br />

IP subnets such as 10.2.3. are allowed. Hostnames such as crm.example.com<br />

are allowed.<br />

Partial hostnames such as .example.com are allowed.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!