Download GL800 Software Manual pdf (9.7MB) - Graphtec America

9-3 Trigger/Alarm SettingsSettings such as the trigger start condition, stop condition, alarm settings, and those for sending email are made at thisscreen.152637489101112No. Name Description1 Trigger Start Condition Use this button to select the trigger start condition.OffThere is no data capture start condition.LevelData capture starts when the desired channel reaches the specified levelvalue.Alarm Data capture starts when the specified alarm occurs.Date Data capture starts at the specified date and time.Time Data capture starts at the specified time.External Data capture starts with the external terminal signal.Data capture starts when the external trigger signal detects a falling ofabout 2.5V or less.Ref.Section2 Start sideIf "Level" has been selected for the start condition, make the required level settings here. 9-3-1Level Condition3 Start sideAlarm ConditionIf "Alarm" has been selected for the trigger start condition, set the alarm number here.Select an alarm number between 1 and 4.4 Start sideDate SettingsIf "Date" or "Time" has been selected for the trigger start condition, make the requiredsettings here.Date : Set the year, date, and time to start the data capture.Time : Set only the time to start the data capture.5 Trigger Stop Condition This parameter specifies the condition for stopping data capture.OffThere is no data capture stop condition.LevelData capture stops when the desired channel reaches the specified levelvalue.Alarm Data capture stops when the specified alarm occurs.Date Data capture stops at the specified date and time.Time Data capture stops at the specified time.External Data capture stops with the external terminal signal. Data capturestops when the external trigger signal detects a falling of about 2.5Vor less.Capture time Data capture stops when data has been captured for the specifiedlength of time.31