AFMETCAL Newsletter - Wright-Patterson Air Force Base

Page 12AFMETCAL NEWSLETTERApril 2011Volume 31, Issue No. 3News and Notes (continued)(Continued from page 11)Self-Sufficiency Codes (continued)KOD (CMS, K100 Directed) - Use when the published TO 33K-1-100-2 or CMS Cal Responsibility directs asource of support (i.e. Note Codes (N9, N10, N59A, N64, etc.), AFPSL, PMEL 2A (TYPE IIA), PMEL 68(DEG), and CONTRACT.KPD (K Procedure Directed) - Use when the published TO 33K-1-100-2 or CMS Cal Responsibility is PMELand the 33K Series Calibration procedure requires a source of support such as PMEL 68º room.LOS (Lack of Standards) - Use when the published TO 33K-1-100-2 or CMS Cal Responsibility is PMEL andyour PMEL is not authorized the equipment to support this requirement. DO NOT use this code if the CalResponsibility has a Note code (N9, N10, N59A, N64, etc.) or AFPSL, PMEL 2A (TYPE IIA), PMEL 68(DEG), and CONTRACT.LOQ (Lack of Equipment) - Use when the published TO 33K-1-100-2 or CMS Cal Responsibility is PMELand your PMEL is authorized the equipment to support this requirement, but do not have equipment on hand.CON (Contract Repair) - Use when the published TO 33K-1-100-2 or CMS Cal Responsibility is PMEL/CONTRACT where the PMEL is responsible for calibration. Maintenance support will be obtained from acommercial source. DO NOT use if the Cal Responsibility is CONTRACT.MFR (Manufacturer Repair) - Use when the published TO 33K-1-100-2 or CMS Cal Responsibility is PMELand the item have to be sent to a commercial repair facility. DO NOT use this code if item is still under Warranty.SIO (Standard Inoperative) - Use when the published TO 33K-1-100-2 or CMS Cal Responsibility is PMELand your PMEL is authorized the equipment to support this requirement but your standard on hand is inoperable.WAR (Warranty Repair) - Use when the published TO 33K-1-100-2 or CMS Cal Responsibility is PMEL andthe item has to be sent to a commercial repair facility for repair under warranty conditions.LOE (Lack of Environment) - Use when the published TO 33K-1-100-2 or CMS Cal Responsibility is PMELand your laboratory environment is inoperable/out of tolerance to the point lateral support is required. DONOT use this code if the Cal Responsibility is PMEL 68 (DEG) unless your laboratory has 68º room and theenvironment is inoperable/out of tolerance to the point lateral support is required.LOF (Lack of Facility) - Use when the published TO 33K-1-100-2 or CMS Cal Responsibility is PMEL andyour laboratory does not meet requirements for the calibration of that item. DO NOT use this code if the CalResponsibility is PMEL 68 (DEG).LOK (Lack of Skills) - Use when the published TO 33K-1-100-2 or CMS Cal Responsibility is PMEL andyour laboratory does not have a qualified technician to support the requirement.(Continued on page 13)