2.2 The IBM 7171 ASCII Device Attachment Control Unit - Index of

C.19.3 7171MLNK TERMTYPS Macro[label] TERMTYPS name1,name2, .... [+1-1%]The meaning of each field is described below:labelTERMTYPS+ignored if present, useful for documentation onlyThe Macro's nameA plus results in a CR-LF being sentout in the VALID TYPES ARE message.A minus results in all terminal nameswithin a sublist being hidden from theVALID TYPES ARE list.A percent results in the beginning of a newterminal names sublist. This is very usefulfor systems which have different Model Groupsdefined by the Sys Gen.names1) labels of TERM macros2) symbols equated to labels of TERM macros3) ROM terminal names.Several consecutive TERMTYPS macros may be coded to providecontrol over the display of the ENTER TERMINAL TYPES message.All but the last TERMTYPS statement may end with a +%, or - character. TYPETERM must be a validterminal type for 717110 to operate.Figure C-37. TML TERMTYPS SyntaxAppendix C. IBM 7171 Support Utility for Modifying Terminal Tables C-83