2.2 The IBM 7171 ASCII Device Attachment Control Unit - Index of

C.24 EDL to TML ConversionConversion of EDL files to TML files can be accomplished by doing the following:1. Make sure file format is variable record length, variable record length is thedefault in most PC Editors.2. Eliminate line numbers in col 73-80.3. Search for continuation chars in col 72.Eliminate continuation char.Eliminate or move any comment between parms and col 72. If the userchooses to move a comment, there are two places the comment may beplaced:- On a separate line with a STAR, '*', in column 1.- In the comment field of the last line of a statement.The continuation line may begin in any column by simply placing aCOMMA, ',', after the last parm on the line.Here is an example of an EDL file before the comment change, and after thecomment change (2 variations):Column # 19 16 72 80EDLlabel macro op1, * comment 1 $00000001op2, * comment2 $00000002op3 * comment3 $00000003TMLlabel macro op1,op2,op3* comment 1 comment2 comment3TMLlabel macro op1,*comment 1op2,*comment2op3 * comment3Figure C-42. TML Comments4. All terminal names which equate to ROM terminal names must be changed ifthey are to be redefined in TML. Here are the ROM terminal names and theirvalues, see also Appendix D, "Interface for User Supplied Table ModificationProgram" on page D-l of the IBM 7171 Reference Manual and ProgrammingGuide. for a ROM listing.C-92 IBM 7171 Reference Manual and Programming Guide