Call Control Curriculum Path - Genband

CSLAN20 ERS 8600 (CS LAN) Operations and ConfigurationCourse Description:The purpose of this course is to provide knowledge and understanding about the EthernetRouting Switch 8600 (ERS 8600) as a Communication Server Local Area Network (CS LAN)for a Voice over IP (VoIP) Network. This course will focus on the ERS 8600 and how it isdeployed and configured to support the CS LAN functionally.Intended Audience:The audience consists of individuals performing any of the following: Network verification Network surveillance Network analysis Network provisioning supportKey Topics: Introduction to the CS LAN ERS 8600 hardware ERS 8600 user interfaces CS LAN physical port configuration CS LAN Layer 2 configuration CS LAN Layer 3 configuration CS LAN VRRP configuration CS LAN VLAN functionality ERS 8600 system configuration in the CS LAN CS LAN maintenance and troubleshooting toolsObjectives:Upon completion of this course, you will be able to: Describe the purpose of the CS LAN. Identify the ERS 8600 hardware used in support of the CS LAN. Navigate the three ERS 8600 user interfaces. Configure ERS 8600 physical port parameters. Configure ERS 8600 Layer 2 functionality. Configure ERS 8600 Layer 3 functionality. Configure ERS 8600 VRRP functionality. Identify and configure ERS 8600 CS LAN VLAN functionality. Configure and verify ERS 8600 system functionality and parameters. Use ERS 8600 maintenance and troubleshooting tools.Prerequisite Skills:Working knowledge of data communications networksRegister by going to http://www.genband.com/Home/Resources/Training-Course-Registration.aspx.For questions or comments regarding GENBAND Training, email training@genband.com or call 972-461-4134